Hummer won’t start.
Thread Starter
|
Junior Member
Joined: Jan 2023
Posts: 1
Hummer won’t start.
Hummer won’t start. Here’s what I know.
-it’s in park. Verified by checking the disengage switch under the plastic. To add; the transmission linkage is fine.
-backup camera is on, so I believe the computer thinks it’s in reverse, but no reverse lights.
-keys were stuck, but I popped the column to release the switch to take them out.
-when attempting to start, here’s what happens.
1. key in, turn, check engine light on, and audible fuel pump starts.
2. turn for ignition. Nothing. No clicks. No indication the starter solenoid is doing anything.
what am I missing.
-it’s in park. Verified by checking the disengage switch under the plastic. To add; the transmission linkage is fine.
-backup camera is on, so I believe the computer thinks it’s in reverse, but no reverse lights.
-keys were stuck, but I popped the column to release the switch to take them out.
-when attempting to start, here’s what happens.
1. key in, turn, check engine light on, and audible fuel pump starts.
2. turn for ignition. Nothing. No clicks. No indication the starter solenoid is doing anything.
what am I missing.
Senior Member
Joined: Jul 2012
Posts: 8,999
From: C-Town
Hummer won’t start. Here’s what I know.
-it’s in park. Verified by checking the disengage switch under the plastic. To add; the transmission linkage is fine.
-backup camera is on, so I believe the computer thinks it’s in reverse, but no reverse lights.
-keys were stuck, but I popped the column to release the switch to take them out.
-when attempting to start, here’s what happens.
1. key in, turn, check engine light on, and audible fuel pump starts.
2. turn for ignition. Nothing. No clicks. No indication the starter solenoid is doing anything.
what am I missing.
-it’s in park. Verified by checking the disengage switch under the plastic. To add; the transmission linkage is fine.
-backup camera is on, so I believe the computer thinks it’s in reverse, but no reverse lights.
-keys were stuck, but I popped the column to release the switch to take them out.
-when attempting to start, here’s what happens.
1. key in, turn, check engine light on, and audible fuel pump starts.
2. turn for ignition. Nothing. No clicks. No indication the starter solenoid is doing anything.
what am I missing.
Super Moderator
Joined: Jul 2007
Posts: 13,090
From: Boat Town USA MI
What is the resting voltage of your Battery? When you key gets stuck in the ignition, that is GM's message to you that the battery is dead.
Are you still trying to use the Crappy Azzed OEM Battery Terminal Connectors? If so hack them off immediately and replace with a quality aftermarket set like Stingers or your favorite brand.
Are you still trying to use the Crappy Azzed OEM Battery Terminal Connectors? If so hack them off immediately and replace with a quality aftermarket set like Stingers or your favorite brand.
Thread
Thread Starter
Forum
Replies
Last Post
AR15wheeler
PRIVATE For Sale / Trade Classifieds
4
Apr 20, 2015 09:29 PM
