I'm worried about the tore rubbing the out side of the fender because of the offset.

 

No idea what vehicle you have.

 

2004 h2

 

What's a "big offset"?

 

Here is basically the same thing. Instead of 35s, they are 325/50r22s with a negative 76
offset.

As the video says, it's going to stretch the tire out just a hair with 325s.... a 35" tire is going to be 12.5" wide or about 315ish.
If you're going with a 14" wide tire, I'd consider going 335, but that's going to stick out like crazy. Maybe 22x12 would be a good compromise?

 

I have a fab tech 6 inch lift coming in for it soon. And was just wanting the 14 wides with the -76 offset. I already have some 37's for the 22x14 wides but I'm worried it will rub, not on the inside but on the black plastic fender trim.

 

I am running 38x15.50 on a 17x10 inch wheel with a zero offset. I have a 3 inch lift in the back because of spacers, I have maybe a 2-2.5 inch lift in the front because of upgraded keys.

I dont rub unless I am locked at full turn.
I also have MT tires so the **** catch everything when I am at full lock.

I think you will be ok.
Given a six inch lift with 35s or 37s might make them look really small.
My 3 inch make that truck look tight.
Get compliments all the time

 

jsbihn, have you ever posted your H2? I don't think I've ever seen it. It sounds bad *** though.