hello all, about 3 months ago got a new to me 06 h2, and love it.

so since i am ****, and need to make sure my vehicle is sound, i have replaced the spark plugs, wires, cleaned the TB, changed the oil, changed tranny fluid & filter, transfer case fluid, front & rear diff fluid, new pitman arm, new radio, cleaned ect.....

so on to my ongoing and most recent issue....the steering wheel switches lights are out. so the story all started when the top two switches were not lit up but worked, so i did research and found out i could change the bulbs, so i got some and swaped them out....nada, so back to research for the right bulds since i figured i bought the wrong ones, so got the right bulbs, put them in, and while the switches were out my buddy did some testing of wires, and found no power, but we did get a small spark on accident when testing a few diffrent items. so not thinking much about it i put the switches back in with the right bulbs and now not only do the top ones not work, neither do the bottom ones, so immediatly i figured that we blew the lights on the lower switches with the small spark eariler.

So now i bought 4 new switches put them in and still no lights, so i went back to research and have found that there is a 2a fuse located near the BCM.....am i on the right track? and where is the fuse? i can't seem to find a clear answer


thanks in advance,

 

well i found an inline 2a fuse under the steering wheel coulmn, replaced it and wala fixed

if any one is looking for this, mine was a rectangle box about 2" tall and wrapped with the wiring in electrical tape (fuse is not exposed)

 

Can you post a picture? I know of two fuse locations but his sounds like a third.

 

sorry, the dash is all closed up now