TORSION BAR ADJUSTMENT
I thought about the nittos but the red H 3 with the 325 65 18 in the pro comp exttremme is bad as# loooking i think check it out on www.cardomain
ORIGINAL: Dennis
Good excuse to go out and have a smoke...[sm=smokin.gif]
Mucho grassyass..I think I seen what you're talking about..On the H3, the adjustment bolt (about a 7/8) is on the outboard side from the torsion bar..I guess..I see nothing inside of the frame towards the center of the underneath..
So, if I'm not mistaken..Jack up the front end so both tires are off the ground. Put a mark on the bolt to count 2.5 turns CW (each), this will give the front end a little lift to level it up with rear end..
[sm=feedback.gif]
ORIGINAL: shortbus
here, i drew arrows that stand out against the mud
[IMG]local://upfiles/69/388729D3E2BC4481AAC69637E6A8C084.jpg[/IMG]
here, i drew arrows that stand out against the mud
[IMG]local://upfiles/69/388729D3E2BC4481AAC69637E6A8C084.jpg[/IMG]
Mucho grassyass..I think I seen what you're talking about..On the H3, the adjustment bolt (about a 7/8) is on the outboard side from the torsion bar..I guess..I see nothing inside of the frame towards the center of the underneath..
So, if I'm not mistaken..Jack up the front end so both tires are off the ground. Put a mark on the bolt to count 2.5 turns CW (each), this will give the front end a little lift to level it up with rear end..
[sm=feedback.gif]



ORIGINAL: inked
So Dennis, is this the bolt that i adjust? I believe you can see it in the 3rd pic. Thanks.
So Dennis, is this the bolt that i adjust? I believe you can see it in the 3rd pic. Thanks.
ORIGINAL: Dennis
Yes..the one that seems to go through the crossmember, outboard of the rear end of the torsion bar...Yup, that's the one.
ORIGINAL: inked
So Dennis, is this the bolt that i adjust? I believe you can see it in the 3rd pic. Thanks.
So Dennis, is this the bolt that i adjust? I believe you can see it in the 3rd pic. Thanks.
You guys rock - I will be doing it early tomorrow morning!! Will send some before and after pics!
Hey Hummerforums:
Okay I did the tbar adjustment and you guys may not be able to tell in these pics but I can definitely tell just looking at it driving it!!
Check it out the before picture:

The after picture, raised almost 3 inches to level it with the rear which is 9.5 inches from the tire to the top of the whell well:

Worked freakin perfect for me!! thanks again hummerforums.com! Now onto 35's and accessories and please come on over and post your pics at www.ihumm.com - "WE WANT TO SEE YOUR HUMMERS!!!"
Okay I did the tbar adjustment and you guys may not be able to tell in these pics but I can definitely tell just looking at it driving it!!
Check it out the before picture:

The after picture, raised almost 3 inches to level it with the rear which is 9.5 inches from the tire to the top of the whell well:

Worked freakin perfect for me!! thanks again hummerforums.com! Now onto 35's and accessories and please come on over and post your pics at www.ihumm.com - "WE WANT TO SEE YOUR HUMMERS!!!"


