One Headlight Dim

Reply Subscribe

Thread Tools

Search this Thread

Jul 20, 2023 | 08:13 PM

#11

Kevin10Skidoo

Thread Starter

Junior Member

Joined: Jun 2023

Posts: 5

Quote:

Originally Posted by Happy Hummer

Time to check continuity and voltage drop for each of the headlight wires. Individually lol. Back probe each wire at the light socket (the back of the light housing) and then connect the other end of the probe at the fuse or the Relay respectively. I'm guessing you got the green crustie growing.

found out I had the ground and the low beam wire flipped since March.

The new wire had a black on the edge. So I assumed Ground. Turns out ground is the middle. I have it hooked up correctly now.

Do I need to take a battery terminal off or let it reset somehow? I assume there is a protection mode?

Jul 20, 2023 | 08:30 PM

#12

brothapig

Senior Member

Joined: Dec 2019

Posts: 193

If you still have your extra ground installed, you need to remove it. This system needs to work with a floating ground on the circuit not being used (low beam or high beam). Take a look again at the schematic, specifically on the relay I mentioned (relay 70).