When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hummer H3For the Hummer driver who wants the rugged look and off road capabilities of the Hummer, but in a smaller size and with a more fuel economy friendly engine.
My 3 caught the bug:::>condensation/water inside the headlights. I removed the HL assemblies and dried them out with my wife's hair drier, then resealed.
With the grill removed I noticed a lot of debris behind the bumper(packed full to the condenser)
I used a shop vac and compressed air to remove. Then noticed rust on the bumper, inside and out, and decided to go all in. Removed the bumper & cover, and pressure washed the front end along with the bumper cover. High speed wire brushing & sanding on the bumper, then 4 coats of primer/paint. Also touched up any surface rust spots on the front frame supports. During re-assembly I also cleaned/greased the connections/contacts, even though they were clean and working perfectly before.
Moisture inside headlights front disassembled
