2006 Hummer H2 (120,000 miles)

I am curious as to what type of front suspension components to replace the worn out stock.

1. I want to keep the truck at the standard height
2. I want to replace the front suspension and steering. (shocks have already been replaced)
3. Brands I am looking at are Kryptonite and Cognito.
4. This is my daily driver (14.2 MPG) about 60 miles a day commute
5. I don't do much off roading but If I'm going to replace parts I rather get better then stock.
6. This issue came up because I've had the truck since '06 and recently there's a lot of noise coming from the front suspension. I usually lubricate all 10 or 11 points but no luck.
7. check out videos:

 

I went through all my steering components a year or so ago and replaced everything with MOOG HD Problem Solver parts. They were definitely beefier than the stock parts. I also added a Bilstein steering dampener. There are other add ons which weld in to further strengthen the steering which the way your rig is beat on I would probably recommend. I offroad as well but I take my time going over and through places.

Tie rods I went with DMax HD tie rods from DMaxStore.com. They have quite a few parts listed for H2s. I have not touched my A-arms yet but I am thinking that may be my next project as I just replaced both front hubs and front shocks.

 

I think Lojac said it best. MOOG, Bilstein and Dmax are the best choice for your rig. I spent a lot of time in that very canyon in my youth.