I don't see any installation instructions. Should anything be greased when we install them?

 

Reverse the removal process for install. I always clean the mounting bolts with a bench grinder wire wheel and slap a little anti-seize on the threads.

 

OK, no grease on the bushings?

 

OK we got the Monroe Reflex shocks installed, mostly.

How tight does the top nut need to be? I did not see a spec.

 

FRONT SUSPENSION
Hub and Bearing Assembly to Steering Knuckle Bolts 180 N·m 133 lb ft
Lower Control Arm Ball Joint Stud Nut
First Pass 85 N·m 63 lb ft / Second Pass Plus 60 degrees
Lower Control Arm to Frame Bolts Front 165 N·m 122 lb ft
Lower Control Arm to Frame Bolts Rear 180 N·m 133 lb ft
Shock Absorber Tenon Nut 30 N·m 22 lb ft
Shock Absorber to Lower Control Arm Nut 80 N·m 59 lb ft
Stabilizer Shaft Insulator Clamp Bolts 50 N·m 37 lb ft
Stabilizer Shaft Link Nuts 80 N·m 59 lb ft
Upper Control Arm Ball Pinch Bolt Nut 70 N·m 51 lb ft
Upper Control Arm to Frame Nuts 155 N·m 114 lb ft
Wheel Speed Sensor Mounting Bracket Bolt 20 N·m 15 lb ft

REAR SUSPENSION
Leaf Spring to Front Bracket Nut 125 N·m 92 lb ft
Leaf Spring U-Bolt Nuts 76 N·m 56 lb ft
Spring Shackle to Frame Nut 85 N·m 63 lb ft
Spring Shackle to Leaf Spring Nut 85 N·m 63 lb ft
Shock Absorber Lower Bolt 95 N·m 70 lb ft
Shock Absorber Upper Bolts 35 N·m 26 lb ft
Stabilizer Bar Lower Link Nut 80 N·m 59 lb ft
Stabilizer Bar Upper Link to Frame Nut 80 N·m 59 lb ft
Stabilizer Clamp Bolts 50 N·m 37 lb ft

 

Thanks!

 

The Monroe rears were just delivered.

One is light gray and the other + fronts were black.

All were purchased from Advance Auto

 

Same shock black or gray, as long as you have the part #s 911527 & 911528

 

We could live with either color on the rear but not one of each. That would be weird.

 

Oh, hell no... call advance immediately and tell them to match the shocks!!!!!!!!!!!!!!!!!