Remote Control Door Lock Receiver Location?
2009 H2 SUT
Remotes started to only work if held inches from vehicle. Previously they worked great. Changed batteries in remotes. No joy. Checked battery voltage, All good.
Chasing the RCDLR as culprit. No clue where it is located. I see some reference the BCM, but found a separate part number for the RCDLR.
Any suggestions appreciated.
Thanks
Remotes started to only work if held inches from vehicle. Previously they worked great. Changed batteries in remotes. No joy. Checked battery voltage, All good.
Chasing the RCDLR as culprit. No clue where it is located. I see some reference the BCM, but found a separate part number for the RCDLR.
Any suggestions appreciated.
Thanks
also the Tire pressure system uses the same FM receiver and antenna (located in the RCDLR), are you having issues with the TPM system?
The RCDLR receives a signal form the remote transmitter to start it sends a signal to the BCM and then the signal is sent to the ECM, both check for a list of conditions to be met then the start command is allowed.
Neal
The RCDLR receives a signal form the remote transmitter to start it sends a signal to the BCM and then the signal is sent to the ECM, both check for a list of conditions to be met then the start command is allowed.
Neal
Thanks for responses. Remotes all good, cleaned up w/ new batteries-still have issue. TPM has a occasional issue with signal (1 day out of month), then it's fine. With lock/unlock, remote start, and TPM issues, kinda looking like something with the RCDLR. Thanks for the input, I'll go to digging.
Thread
Thread Starter
Forum
Replies
Last Post
happythree
PRIVATE For Sale / Trade Classifieds
0
Feb 14, 2014 02:49 PM



