What is the stock distance between the center of the hub/axle to the fender on both front and back axles of the H2?

Neal

 

I'm at 27.5" from center of hub to fender, hopping someone will post the stock measurement so we know what that is.

Going to put my H2 on the lift and check the Z & D trim height soon to get an idea of where I'm at compared to the stock trim height

Neal

 

I have 25 1/2 " rear and 25 1/4" front.

 

Thanks Calif Phil, appreciate the help

Neal

 

I just checked two stock 2008 Hummer H2s... looks like they need to be leveled... Front 1 = 24.5 (Center to top fender moulding edge)
Rear 1 = 25.5 (Center to top fender moulding edge)
Front 2 = 25.5 (Center to top fender moulding edge)Rear 2 = 25 (Center to top fender moulding edge)

 

Assuming everything is factory, the best way to check body height is to confirm ground clearance on page 6 of the attached.

 

appreciate the info Brunob00 and clsimmon

Neal