H2 2008 throws these codes. Anyone experienced this before? I’ve tested rear HVAC actuators seems blend door and mode actuators both working (mode door was stuck which I have to fix) I’ve run short circuit test as hooking multimeter to battery negative post and pulled all fuses related to HVAC system but no lack.
Codes are:
HVAC Control Module (VACCM) 4 problems exist

1.B0433-02

Temperature Control 3 Feedback Circuit Short To Ground

2.B3782-02

Air Flow Control 10 Feedback Circuit Short To Ground

3.B0433-61

Temperature Control 3 Feedback Circuit Actuator Stuck

4.83782-61

Air Flow Control 10 Feedback Circuit Actuator Stuck

 

the feedback circuit error is probably that your blend doors are stuck in a position that the reohstat is stuck on the ground side. the reohstats are what tell the motors it's travel limits. usually one side is ground the other will have a referance voltage and the wiper arms position between the 2 is it's corrolation in space like open or shut.