Truxxx Kit Question
Thread Starter
|
Junior Member
Joined: Oct 2009
Posts: 22
Truxxx Kit Question
Okay so I just got my Truxxx leveling kit and tried installing. I got to the first side and unbolted the TB bolt as per instructions.
http://www.truxxx.com/pdf/403010.pdf
So when I did that, I had the bolt all the way out and put the spacer on the bolt and could not screw it back in with the spacer because there was not enough treads. I guess the tension was released and that big of a spacer was not going to work. I realize that I may be confused or just having some issues here. I had jacked up the hummer to try and make things easier - still no success. Bolted it back together and figured I will wait until tomorrow when I call and see what I am doing wrong.
Does this sound familiar or can someone help out someone who is confused.
http://www.truxxx.com/pdf/403010.pdf
So when I did that, I had the bolt all the way out and put the spacer on the bolt and could not screw it back in with the spacer because there was not enough treads. I guess the tension was released and that big of a spacer was not going to work. I realize that I may be confused or just having some issues here. I had jacked up the hummer to try and make things easier - still no success. Bolted it back together and figured I will wait until tomorrow when I call and see what I am doing wrong.
Does this sound familiar or can someone help out someone who is confused.
Senior Member
Joined: Dec 2008
Posts: 332
From: miserableconsin
If i was you , i would clean up the parts and take them back to whoever conned you into buying it. then do a search on this forum on how to adjust your torsion bars to level your H3 without any aftermarket CRAP!
Senior Member
Joined: Dec 2008
Posts: 332
From: miserableconsin
Probably costs more than taking an H3 to a dealer, having them crank the torsions then aligning it. mine was done before i picked it up new. they charged me a wopping 75.00 !