fog light install help (wiring)

Reply Subscribe

Thread Tools

Search this Thread

May 16, 2008 | 07:34 PM

lucky19942001

Thread Starter

Senior Member

Joined: Jan 2008

Posts: 358

From:

fog light install help (wiring)

need a little help here.gonna install some piaa fog lights on my brush guard and for the most its a pretty straight forward process.the only thing i am not sure about is one wire.this wire is to power the on/off switch.this is what it says. find a power source to connect the switch wire to. for fog lights this power source must be one that is only powered (+) when the low beam of the headlamps is on. make connection with supplied connector. if it helps the wire is white.

[IMG]local://upfiles/4035/65124DB7540242DEAAE871C7F69C868E.jpg[/IMG]

May 20, 2008 | 02:41 AM

Steve #1

Senior Member

Joined: Jul 2007

Posts: 412

From: TEXAS

RE: fog light install help (wiring)

Quote:

ORIGINAL: lucky19942001

need a little help here.gonna install some piaa fog lights on my brush guard and for the most its a pretty straight forward process.the only thing i am not sure about is one wire.this wire is to power the on/off switch.this is what it says. find a power source to connect the switch wire to. for fog lights this power source must be one that is only powered (+) when the low beam of the headlamps is on. make connection with supplied connector. if it helps the wire is white.

[IMG]local://upfiles/4035/65124DB7540242DEAAE871C7F69C868E.jpg[/IMG]

At the BCM (passenger foot well) BLACK plug pin A2 (when you look at the back of the plug where the wires go in it will be lower left one row up) Yellow is the fog light relay control.

If you prefer to tie them in with the low beems it is pin A5 which is pink/white

Double check to make sure they are 12V +.