I have a 2007 Hummer H3. I need new tires and I see a lot of tires and rims for sale from the new Ford Bronco. They have the same pattern 6X139.7 so I believe they will fit but just want to make sure before I buy them.

 

You'll want to make sure the back spacing 5.75" backspacing, +38mm offset will work as well as the hub centric circle 100.1 mm.

This Hummer H3 wheel has 6 lug holes and a bolt pattern of 139.7.
The offset is 36-40mm
6x5.5 and 7.5"

 

Are Bronco wheels hub centric? Kind of important huh?

 

Thanks for the info. The Bronco rims won’t work. The center bore is 93.1 mm and the H3 is 100

 

That's not quite true. If there is enough meat around the hole you could machine them out to 100mm.
Something as simple as a air die grinder would work nicely.

 

Bronco wheels are lug centric.

 

Then sadly that is gonna put a fork in this thread haha!