Hello. I’m desperately trying to find a rear brake caliper bracket mounting bolt for the rear drivers side. I have a part number for it (GM11589201) but it’s a discontinued part and I can’t find it anywhere. Was anybody able to find one or know of a different bolt that will fir? It’s for a 2007 h3

 

14187

 

Thats the guide pin kit. I’m looking for the caliper bracket mounting bolts

 

Check your local diy or hardware store..

11589201: M12 X 1.5 6G X 28.5)(08.900).

Menards>M12 x 1.5 x 30mm class 10.9

 

As you know this is an out of stock item and sorry, but your local hardware store won't carry fine thread bolts in 12MM l;
When I replaced my rear brake carrier bolts as prescribed by our service manual I went here . . .

https://www.belmetric.com/m12x15-fin...208_1223_1995/

I ended up getting the longer bolt and cutting it to 28MM length
or you can use the 25MM length and these are flange bolts

 

I do not recommend going shorter, more threads stronger hold. 30mm length with a washer would be close to oem length.

 

Agreed, that is why I went to 40MM length, but you are much better using a flange bolt

 

I had to go the hardware store to find them. The mail would take too long to get here and I need the vehicle. I did save that website for the next time I need something though. I appreciate all the input