Exhaust question on 2006 H3
#11
Feels like I got lucky on this one. It does not happen often for me so I keep thinking I missed something. The eBay seller was a Hummer dealer selling off his remaining overstock. It was in an sealed box just like the pictures above. I paid $184 as stated above, plus $100 shipping. It showed up at my door three days later. My plain was to install it in my driveway when the weather got better. I was out today and passed a local muffler shop. I stopped in just to see what the cost would be. He said one shop hour at $94 if I did it now while he was slow. I ran home and grabbed the system and headed back before he changed his mind. They pull the H3 in and four tech's ripped into it. 15 minutes later the H3 was out front and he handed me a bill for $46. For a total of $324. I got a GM stainless touring exhaust with dual tips installed! I'm happy with the results.
Last edited by 58Bisc; 01-12-2012 at 04:16 PM. Reason: Math...
#17
Just bringing the thread back to the front of the pile for those who were asking about the pictures. I'm waiting for the GM H3 tips to be delivered. I'll post a picture when they are installed.
#19
The Tips!!!
Ok, so there are three different GM performance exhaust tips for L5 H3.
17802016 Single wall, angle cut, rolled lip H3 logo
17802017 Dual wall, stright cut, rolled lip, H3 logo
17802018 Dual wall, angle cut, rolled lip, H3 logo
The pictures in this install are for 2 @ 17802018. Five minute total install time. One 15mm socket and a tape measure. You can set them as deep as you like, I wanted to be able to see the H3 logo.
17802016 Single wall, angle cut, rolled lip H3 logo
17802017 Dual wall, stright cut, rolled lip, H3 logo
17802018 Dual wall, angle cut, rolled lip, H3 logo
The pictures in this install are for 2 @ 17802018. Five minute total install time. One 15mm socket and a tape measure. You can set them as deep as you like, I wanted to be able to see the H3 logo.
#20
Ok, so there are three different GM performance exhaust tips for L5 H3.
17802016 Single wall, angle cut, rolled lip H3 logo
17802017 Dual wall, stright cut, rolled lip, H3 logo
17802018 Dual wall, angle cut, rolled lip, H3 logo
The pictures in this install are for 2 @ 17802018. Five minute total install time. One 15mm socket and a tape measure. You can set them as deep as you like, I wanted to be able to see the H3 logo.
17802016 Single wall, angle cut, rolled lip H3 logo
17802017 Dual wall, stright cut, rolled lip, H3 logo
17802018 Dual wall, angle cut, rolled lip, H3 logo
The pictures in this install are for 2 @ 17802018. Five minute total install time. One 15mm socket and a tape measure. You can set them as deep as you like, I wanted to be able to see the H3 logo.