$990 to replace (4) moog upper control arm bushings. Just looked up the bushings on Amazon, around 20 bucks a pop for acdelco or 13 bucks for moog. Was quoted $130 per bushing. Wtf?
A reason why I have done most of the work myself on our truck and invested in some tools. It is a lot of work, just looking at the savings by doing this myself. Dinner on me.

 

Only $126. per control arm including bushings and ball joint: 25905442
$55 for the moog control arm including bushings and ball joint: RK620054
$70 for the moog (problem solver) control arm including bushings and ball joint CK620054

 

yup. I understand it’s a business but the quotes I get for some of the work is crazy. lots of the help here and YouTube, it’s a gold mine.

 

I think I would do the GM or Moog Problem solver complete control arm. It would be an easy swap and a lot less work then swapping just the bushings.

 

i wish I did that before I did all the work replacing the ball joints. Now that I have the press tools I just may do some extra work or get new control arms and just refurbish the old ones for the heck of it.

 

I would never reuse a 15+yr old control arm ever! Just buy the complete arms of your choice, plenty available cheap, and mount the old control arms on a wall as a trophy or on a shelf.

 

I suppose I’ll go that route in the near future. They are pretty solid though.

 

Just stay away from the Chiniseum Dorman and other cheap brands. I would rather have a good used OEM control arm with new MOOG parts installed than the white box parts store junk.