Just searched the internet and this forum but didn't find anything as far as where to purchase one. Need ASAP.
Any help? Thanks in advance.

 

The gear is not a separate part that you can buy.....

https://www.ebay.com/itm/Windshield-...-/353055253869

 

Note, the gear houses a small magnet which interacts with a hall-effect sensor on the PCB.

 

What does PCB stand for?
Do you know where to purchase one?

 

PCB = printed circuit board.

I gave a link in my first post for one but not the gear by itself.

 

Cardone remans the 19150497(03-07)
Make a call and ask them for the gear: 800-777-4780 or 888-280-TECH

 

If the plastic gear is shot you may well have other issues, check the motor and plastic-gear shafts to see if their bearings need replacing.

RA stocks 19150497 for $247.79, if you going to the trouble of accessing the wiper motor why not replace it, surely you don't want to revisit it again?

Also check for "play" in the "Wiper Transmission Linkage". If you hear a "clunk" when the wiper-arms change direction, you may find their shaft bushes are worn. The noise is not the main issue, it's the "lift" in the wiper blade causing it not to clear the windshield properly.

 

I've used their parts in my shop and steer clear from them. Poor quality in their workmanship.
I've seen parts that were poorly cleaned and painted from the junkyard.

 

WTF? You asked for a replacement gear, now you post a copy from a bs review for wm replacement.
Btw, if the wiper motor housing was "poorly cleaned and painted from the junkyard", that doesn't affect the performance!
What's inside matters!

 

No. I didn't post any copy of a bs review. I replied to the recommendation for a Reman. From a company that paints over grime to be more acurate.
What a predicament, charging a customer for a new reman. in that condition, then being confronted by the customer afterwards and telling the customer, Oh "Whats inside that matters! 🙄
No thank you. 😉