PRIVATE For Sale / Trade Classifieds Sell/Trade your stuff for free! NO COMMERCIAL POSTS!
Sponsored by:
Sponsored by:

Stab system traction failure

Thread Tools
 
Search this Thread
 
  #1  
Old 05-01-2016, 05:29 PM
msnyder's Avatar
Junior Member
Thread Starter
Join Date: May 2016
Posts: 3
Default Stab system traction failure

I'm getting a stab system traction failure reduced engine power warning. Been to the Chevy dealer 4 times since January. First two times they reprogrammed my pccm, said if it happens again will need to replace, well it did so they replaced it, had it less than 10 days and it happened again, they kept it for 4 days and nothing. The last 4 days it happens constantly, I turn it off and wait and it sometimes resets or I clear the code. I'm thinking it may be the transfer case shift control module that is in the dash on the passenger side, had the drainage problem there and think it may have contributed to some of this. Need thoughts on this please, driving me crazy.
 
  #2  
Old 05-02-2016, 10:42 AM
Doc Olds's Avatar
Super Moderator
Join Date: Jul 2007
Location: Boat Town USA MI
Posts: 12,204
Default

Welcome to HF.

The New Member Area is not the place for tech questions, and if it were, you did not specify, year, model and mileage to allow people to possibly provide a useful response.
 
  #3  
Old 05-02-2016, 11:31 AM
msnyder's Avatar
Junior Member
Thread Starter
Join Date: May 2016
Posts: 3
Default

Thanks for the help
 
  #4  
Old 05-03-2016, 11:37 AM
Doc Olds's Avatar
Super Moderator
Join Date: Jul 2007
Location: Boat Town USA MI
Posts: 12,204
Default

Originally Posted by msnyder
Thanks for the help
No year or Model?
 
  #5  
Old 05-18-2016, 12:15 PM
vacman's Avatar
Member
Join Date: Oct 2012
Location: Westlake oh
Posts: 38
Default

Mine ended up being the BCM it also got wet, dealer has to program, if u buy used u will end up with other vehicle mileage in my case 125,000 instead of 62,000, one dealer charged 75 dollars to do it, other dealer wanted 1700 for BCM and program
 
  #6  
Old 05-18-2016, 12:20 PM
Doc Olds's Avatar
Super Moderator
Join Date: Jul 2007
Location: Boat Town USA MI
Posts: 12,204
Default

Originally Posted by vacman
Mine ended up being the BCM it also got wet, dealer has to program, if u buy used u will end up with other vehicle mileage in my case 125,000 instead of 62,000, one dealer charged 75 dollars to do it, other dealer wanted 1700 for BCM and program
You have no idea if the OP has an H3 or H2, since he did not bother to provide that info, I would suggest we not bother to guess.
 
  #7  
Old 05-18-2016, 12:28 PM
msnyder's Avatar
Junior Member
Thread Starter
Join Date: May 2016
Posts: 3
Default

It's a 2007 Hummer H3. I replaced the PCCM and the Transfer Case Shift Control Module. Thanks for reply vacman. Doc Olds are you the admin for this site.
 
  #8  
Old 05-19-2016, 06:20 AM
vacman's Avatar
Member
Join Date: Oct 2012
Location: Westlake oh
Posts: 38
Default

Originally Posted by Doc Olds
You have no idea if the OP has an H3 or H2, since he did not bother to provide that info, I would suggest we not bother to guess.
Oh I know, I just went through that nightmare lol I as well replaced all those and more
 
  #9  
Old 05-19-2016, 12:12 PM
Doc Olds's Avatar
Super Moderator
Join Date: Jul 2007
Location: Boat Town USA MI
Posts: 12,204
Default

Originally Posted by msnyder
It's a 2007 Hummer H3. I replaced the PCCM and the Transfer Case Shift Control Module. Thanks for reply vacman. Doc Olds are you the admin for this site.
Not admin, just a lowly Mod. I will move this to the H3 section where we might get you some additional help.

Welcome and good luck.
 
  #10  
Old 05-20-2016, 07:04 AM
rsc's Avatar
rsc
rsc is offline
Senior Member
Join Date: Jun 2010
Posts: 1,042
Default

I had that issue for a few days until I replaced the battery. Low voltage will cause all sorts of issues. Doc will tell you to replace the stock battery terminals while you are in there for best performance.
 


Quick Reply: Stab system traction failure



All times are GMT -5. The time now is 06:27 AM.