Winch bumper Fab.

Fallschirmjager

May 12, 2013

9

0

Description:
Here are the steps I had to do to make a new bumper from the old one and install the winch. I took some but not a complete walk through.

Read more »

measuring twice at this point.

measuring twice at this point.

0 2013/05/12 17:35:58 Fallschirm

front tow mount was in the way at this point I had to cut it down.

front tow mount was in the way at this point I had to cut it down.

0 2013/05/12 17:35:58 Fallschirm

tow mount cut to make room for the winch. I kept the top in place to bolt the plate I made to the top too bolts and then bolted the bottom using the three bolts on the bottom of the bar it was welded too.

tow mount cut to make room for the winch. I kept the top in place to bolt the plate I made to the top too bolts and then bolted the bottom using the three bolts on the bottom of the bar it was welded too.

0 2013/05/12 17:35:58 Fallschirm

final mount with the bumper before paint.

final mount with the bumper before paint.

0 2013/05/12 17:32:26 Fallschirm

first mount with the winch on plate to the truck. I soon realized that I would need to flip the winch 180 degrees to fit the wires.

first mount with the winch on plate to the truck. I soon realized that I would need to flip the winch 180 degrees to fit the wires.

0 2013/05/12 17:32:26 Fallschirm

a little better view of where the cut out is for the clutch release for the winch.

a little better view of where the cut out is for the clutch release for the winch.

0 2013/05/12 17:32:26 Fallschirm

0 2013/05/12 17:24:09 Fallschirm

0 2013/05/12 17:24:09 Fallschirm

0 2013/05/12 17:24:09 Fallschirm