Is there any way to prevent 35's from hitting while turning... any stops to adjust... on Jeep Wranglers you can modify the stops but is there anything on the H3?

 

I'm pretty sure you can get spacers but dont quote me. Thats about all you can do I believe. But 35's should only rub while at lock? Are your torsion bars cranked?

 

Torsion bars are cranked... and it's only when I turn the wheel all the way... I'm just tired of the rubbing on tight trails I'm trying to ride...

 

wow dude that trucks ****ing nasty. I like that a lot.

Thats the nature of the beast with 35's. They just naturally rub when at full lock.

 

What make are those tires you have -- I like the tread design.

Are they 315/75/16's

 

Looks Good! I had the same problem, leveled and 35's, tires started rubbing the frt stab bars at full turn lock. I bought four 1/4 inch spacers and almost stopped it. They were cheap so I went back and got 3/8 spacers and the right stopped completely, the left just barely notice it. They make 1/2 spacers but wasn't sure if I would have to change out the studs, Someone on here said you don't but wasn't sure looking when I put the 3/8 on. Spacers will slove your problems but put them on all four corners, don't just do the fronts.