Hey guys! I'm very new to the forum so bear with me...

So I recently purchased a pair of Rigid Industries Dually Diffused lights to hopefully replace my factory DRL's. I would just put in HID bulbs but given that I've heard more negative than positive feedback on HID DRL's I think i'll pass...

I'd like to hopefully have them wired up to where they would work just like the factory DRL's, except install an over-ride switch so I could use them at night. And I would also have a circular face mount made so it would look more flush with the front bumper.

This seems like a fairly simple task, however I'm having problems figuring out how I would mount a dually in that DRL spot...

Would love to hear some feedback from you guys and I'm excited to be apart of this forum!!!

(Btw, this is what I am going for. Stopped by Starwood Motors in Dallas, TX and this was on one of their Jeeps. Still can't figure out how to make pictures up-right so I apologize if they're crooked...)

 

Personally I think a square light in a round hole just looks out of place. I added round LED work lights as my DRL's. Some others have followed what I did, no cutting or hacking anything up they way I installed them. Plus only around $60 after lights, studs, and lock nuts.

 

Thanks LoJac I think you might be right! Do your LED's produce any usable light at night?

 

Eh you can see some light thrown forward but its nothing to really mention. When you look at them head on they are so bright they're hard to look at but in a flood pattern they don't throw much light on he actual ground. They're still DRL's in my opinion which aren't meant to put light on the ground but me more of a marker light during the daytime. I also did the DRL mod so mine are on with the headlights at night as well.