Hello my key less entry don't work nothing happening when i push the buttons.
And i have changed the batteries.
Can someone help me?
It is a Hummer H2 2006.

 

Reprogram them according to the manual... see if that helps

 

Here is the info for the reprogram...I just did it a few minutes ago
Close all the vehicle doors.
Insert the ignition key into the ignition lock cylinder.
Press and hold the door unlock switch.
While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
Release the door unlock switch. The doors will lock and unlock to confirm the program mode.
Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of approximately 15 seconds , the doors will lock and unlock to confirm the programming of that transmitter.
Repeat the previous step to program up to four transmitters.
Turn the ignition switch to the RUN position in order to exit the keyless entry transmitter programming mode.
Operate the transmitter functions in order to verify correct system operation.

 

yeah... what she said...

 

Solarflare, is that the code for the H2 or H3? Or will it work for both?

Paul

 

it's for the H2. I just bought another remote from ebay and had to program it....

 

Hi, old thread I know, but does anybody know that procedur for the H3?

 

By the way, there's nothing about it in my manual...