I just picked up my new H3 today and am installing the headrest Visualogic DVD. Is there any trick to fishing the wires down? I pushed them down the headrest posts but can't seem to locate the wires under the seat. Do I look behind the black plastic trays on the seatback or somewhere else for the wires?

 

try tape and a straight coat hanger to fish it down.

 

yup, gonna need to push the wire through the seat, won't go without some pushing. Once you get it pushed all the way down feel for it under the seat.

 

NO take a little screwdriver and push the fabric towards the front windshield you see two small clips on the top put the screwdriver in the middle of the clip to release it you only have to do one side the one near the console.
Then half way down on the back plastic pull that clip will just pop out then you have enough room to bring the wire down to the very end.




[IMG]local://upfiles/111/05D528E62B0F4C178AFA90D1448CF58F.jpg[/IMG]

 

screw that, by the time your done taking screws out my coat hanger will have ran wires through both seats