When I changed my oil a couple weeks ago on my 07 H3 3.7 Inline 5 I noticed all the stuff you have to remove Just to get to the Oil filter PLUS....I HATE these little 1/2 quart filters.
Does ANYONE know of anyone who may make a Oil Filter Re-Location kit for the H3s. I bought a re-location kit for my 04 Toyota 4x4 and it had TWO One quart Filters in line with each other and I LOVE it.....Maybe SomeOne here on this forum could start making 1 Quart and 2 Quart Re-location kits for the H3s....I WOULD be FIRSt in line to BUY one...

 

See they DO make 1 and 2 quart for a lot of Hummers BUT NOT for a 07 H3

http://www.jcwhitney.com/TRANS-DAPT-...2024_10101.jcw

 

Not what you're asking for but an option nonetheless.

http://www.amsoil.com/storefront/bf.aspx

 

Again Patches,,,,Another AWESOME product BUT,,,,when I tried to look up the application for a 2007 H3 Hummer with 3.7.....NO KIT AVAILABLE,,, I wish SOMEONE would make one,,,Liked what I saw on the site though,,,Awesome

 

I don't think this is the full kit, but it shows to work on an '07.

http://www.car-stuff.com/carparts/hu...tg1276901.html

 

You can get longer filters. You wouldhave to do a bit of searching on a filter site,..or just look through filters in the store.

Filters are sold by length, diameter, and thread diameter and pitch. (and also whether or not they have an anti drain-back valve) And their model numbers are usually codes for diameter, thread and length.

Your H3 has a thread of 13/16" and 16 (pitch?) An outer diameter of 2.921", and a length of 4.526".

If the seal area on the filter housing is larger than the filter,...perhaps you look for a filter that is 13/16" 16 thread, 3.3" dia, and 5.5" long.

There are only a few threads and a few seal diameters. Finding a longer one is nothard usually.

I used NAPA Gold (Wix) for my Subaru, and there were like 3 lengths. I used a longer one. And on that car the sealing surfaceon the blockwas much larger than the filter,..soI amsure I could have looked a bit more and found one that was also bigger in diameter.


On my 06 H3 I just left the uinder trays off and in the basement. It reduced the time for an oil change to a couple minutes. (No need to even jack it up). Unless you are doing serious off-roading,..they don't do anything but add weight. And the H3 is already 1,000 lbs over-weight.

 

With what Hummer4Life found and Patches,,,I found I can COMBINE the TWO products and It WILL work on the 07 H3s with the 3.7 motor...AWESOME guys,,,Thanks a MILLION...You just have to buy ONE.......
http://www.car-stuff.com/carparts/hu...tg1276901.html.....
for 20 bucks and ONE.....
http://www.amsoil.com/storefront/bf.aspx
and then I can run TWO Full length filters.....You Guys ROCK......Going to order now