4 high and low buttons dont work!
just got the H3 and love it but the 4 high and low buttons don't work, when I press them nothing happends, no noises no lights nothing. when I start it up they light up but when I press 4 high lock its like theres no connection.
|
This is well documented on this and other sites dealing with h3's.
1 actuator 2 tcm 3 buttons Just some thoughts. Chris |
just got the H3
my first thought is always,go back to to seller and ask them if it did that.
a dealer should check/fix it? |
any thouhts what to do never happened in the past with the other owners...could the buttons be fried?
|
make sure all connectors are plugged on right.
find another hummer guy to check it side by side. |
Year, mileage options.
Have you read the owners manual on proper operation of the controls? If so then try to get into 4lo. That is when you will hear a click. |
i have a 2007 h3 base just the three 4x4 buttons and traction/stability control..no owners manual but i looked on up an it says to put it in neutral then press the button but i got nothing
|
You must be in 4HI Lock first then neutral 0-5mph and select the 4lo position.
If that does not work then you have a shift fork issue. Search that topic. 100s of posts if it won't go into 4lo once you follow the directions above. |
I have a somewhat similar issue right now, BUT my normal 60/40 AWD is working but when I try 4 hi lock the button does not blink, nor does 4 hi lock engage. No CEL on or anything. Any thread suggestions or advice on any of our issues? 4 Lo works just fine. 4 hi is the only one not working. No idea. If the transfer case motor is bad would it still make it to 4 Lo just fine? Or another issue? HELP
|
All times are GMT -5. The time now is 08:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands