35's on H3
Thread Starter
|
Senior Member
Joined: Feb 2011
Posts: 245
35's on H3
Can some of you with 35's get the the measurement from back of tire to wheel well (bottom) Either I am losing my mind or my shop is absolutely stupid.....I can get about 4 fingers between the drivers side (lets say 4") tire and wheel well. I can only get about 2" on the passenger side. Little does this tell me but they have no idea how to do an alignment......He claims with the T bars lifted you cannot center the caster correctly.....I say BS and want to see if any of you have a good alignment and your caster is centered or (+) a degree or two. He claims they are out or room with the lower control arm adjustment.....I think the only other shop that does alignments in my town is NTB and that aint happenin.
Member
Joined: Aug 2010
Posts: 50
From: Southern California
Can some of you with 35's get the the measurement from back of tire to wheel well (bottom) Either I am losing my mind or my shop is absolutely stupid.....I can get about 4 fingers between the drivers side (lets say 4") tire and wheel well. I can only get about 2" on the passenger side. Little does this tell me but they have no idea how to do an alignment......He claims with the T bars lifted you cannot center the caster correctly.....I say BS and want to see if any of you have a good alignment and your caster is centered or (+) a degree or two. He claims they are out or room with the lower control arm adjustment.....I think the only other shop that does alignments in my town is NTB and that aint happenin.
Dont have any specs for you, but it has been said with the 35's and a 24" level .. the camber cannot be set perfect. I personally only leveled to 23.25 and they said nothing at my alignment .. but it may not be dead on either.
