2006 H3 Base. Installed aftermarket stereo and it has power and everything but no sound. When i put back the factory unit it has sound. Please help. Mine has no Amp i think. There are only 3 wires left the aftermarket harness that i did not connect it; it was the orange, blue and white blue. I tried already to connect the bluer the white blue to power but still
no sound. Please help thanks....

 

Welcome to HF.

MOVED as the New Member Section is NOT for tech questions.

What adapter harness did you use? Missing way to much info to offer any help.

If you are asking us to guess what the aftermarket harness is about, ain't gonna happen. Wire diagrams for the H3 are free on the web, look one up.

 

the blue and blue/white are the remote power for the amp and the other for power antenna you have to read the documentation that came with the harness to determine which is which.

 

I took my AMAZON after market stereo/back-up camera to the local stereo shop= 2hours work & $155.00 to install it

 

Thanks for the reply. Actually i just figured it out yesterday. It was the harness that I ordered on ebay. When I check the 24 pin it’s not on proper place. What i did is i move all the pin and match up on the factory. Now its working also you can use the read wiper wire switch to use the power of your aftermarket stereo.