Hummer Forums - Enthusiast Forum for Hummer Owners

Hummer Forums - Enthusiast Forum for Hummer Owners (https://www.hummerforums.com/forum/)
-   Hummer H2 (https://www.hummerforums.com/forum/hummer-h2-8/)
-   -   Locked roof rack-no keys! (https://www.hummerforums.com/forum/hummer-h2-8/locked-roof-rack-no-keys-22629/)

Hitmannactual 01-22-2011 01:00 AM

Locked roof rack-no keys!
 
Bought the 06 used and seller couldn't find keys.

Hasn't been an issue but I'm looking to add a light bar with a cross beam that resembles the stock crossbars.

A. Will it be an issues installing the new bar if I don't have keys to the old one?
B. How can I get the crossbars re-keyed?
C. Any other know issues im not seeing??

parabat 01-22-2011 01:49 AM

Lost keys
 
Hello.
I had the same problem. But if you look at the end caps there should be a serial number on them. If you take that number to a lock smith they will be able to cut you a new set for your roof rack. Mine cost me $5.00 CDN.
Hope this helps.

Cheers Malcolm

calif phil 01-22-2011 08:26 AM

Post the code and if my key is the same number I can mail you a copy of mine. I think they only use a couple of different keys.

bosch 01-22-2011 07:27 PM

same here
 
post the key number one of us will have the same key ...mike

Justin D 05-15-2011 04:02 AM

No Keys.. hello!
 
Hi, I also have no keys to my h2 roof racks. the serials are E003. any takers? thankyou!

rakib1981 07-17-2011 10:20 PM

Looking for roof rack oem key E001
 
Any idea where i can get one? Thanks.

Muddydawg75 07-17-2011 10:26 PM

you have to give us your lock number... they only made 5-6 keys....

rakib1981 07-18-2011 09:22 PM

My key number is E001
 
Need key # E001. If anyone has that please let me know.. Thank you all.

the9thone 07-26-2011 11:13 AM

Needs SP5 key
 
Just got an 06 H3 with Roof Racks(no keys!).
Can anyone cut and send me one. I would greatly appreciate it.
I need an SP5 (GM Part# 88963247). Thanks!

Sound pro 08-01-2011 08:40 AM

You want need a key to install the light bar. The hardest part is fishing the wire through the rubber grommet below the front left ( driver side ) roof corner light. The keys are also very similar E001- E006, I have E-003 on factory X-bars and E005 on factory light bar and I can use either key on both, but it is alittle tricky, you have to rack it in and out as u turn it and they will work. Good luck.

calif phil 08-01-2011 07:14 PM


Originally Posted by rakib1981 (Post 254538)
Need key # E001. If anyone has that please let me know.. Thank you all.

I have a E001 key that I can mail you and you make a copy of it and mail it back to me. Let me know if I can help.
Phil

rakib1981 08-02-2011 04:46 PM

That would be great if you can. I really appreciate your offer. My address is bellow.

Rakibur Joarder
6857 Alden Ridge Dr
Boynton Beach, FL 33437

Let me know if there is ay thing I can do for you. Thanks again.

by1911 08-03-2011 11:08 AM

I am in the same situation, I just bought an 06. I need a E003 key if someone can get a copy made for me, I will pay for it. Just let me know. Thanks

ka3ohl 08-03-2011 07:09 PM

E003
 
We just bought a 2006 H2 with 003 keys. Have a spare if u need.
Ryan

by1911 08-04-2011 07:38 AM


Originally Posted by ka3ohl (Post 256310)
We just bought a 2006 H2 with 003 keys. Have a spare if u need.
Ryan

That would be Great, let me know if I need to send you some money for it. My address is

B. Young
P.O. Box 2871
Cookeville, TN 38502

ka3ohl 08-04-2011 09:26 AM

It'll be in the mail this morning. It will be a few days getting there from southern utah.
Ryan

calif phil 08-04-2011 07:44 PM


Originally Posted by rakib1981 (Post 256145)
That would be great if you can. I really appreciate your offer. My address is bellow.

Rakibur Joarder
6857 Alden Ridge Dr
Boynton Beach, FL 33437

Let me know if there is ay thing I can do for you. Thanks again.

It will go out in Fridays mail. You should get it mid week.
Phil

by1911 08-05-2011 11:18 AM

Thank you very much.

Sav426 08-06-2011 08:37 AM

Hi! This post is a lifesaver!

Does anyine have an eoo5 key?

Please!

Savas Giarenakis
50 overbrook drive
East hartford, ct 06118

rakib1981 08-06-2011 02:57 PM


Originally Posted by calif phil (Post 256464)
It will go out in Fridays mail. You should get it mid week.
Phil

Thanks a bunch. I will mail it back after making a copy ASAP.

3hummers 08-06-2011 03:03 PM

PM Auggie Mathis, he has all the keys.

rakib1981 08-18-2011 10:06 AM


Originally Posted by calif phil (Post 256464)
It will go out in Fridays mail. You should get it mid week.
Phil

Hi Phill,
I mailed the key back today. Please let me know once you recieve it. Thanks a lot for helping me out with the key.

Duro 08-22-2011 03:58 PM

Hello guys,

I also need a roof rack cap key for 03 H2. My lock is #003
I need also one complete cap because one is missing - best also #003, or any another cap with key will be helpful.

Could someone help me?
I'm from Slovakia (central europe)

Regards,

Duro

cbblack007 08-30-2011 09:15 AM

E004 Key
 
Don't know if I can't PM because I am new but I need an E004 key, if someone could help I would appreciate it, I'm in Savannah GA

z_pad_69 10-04-2011 04:41 AM

need E001 roof rack key please
 
If some one would send a copy I would gladly pay for postage and key. Just don't want to go through lock smith and pay the the extra.

Charles B

XxCC3xX 10-04-2011 06:09 PM

How do you find what key number you need?

z_pad_69 10-05-2011 03:01 AM

If you look at the lock there is a number on the round plate where the key goes in. It sounds like they used E001 up to E005

Doc Olds 10-11-2011 04:01 PM

You can edit your own posts by clicking on "Edit".

Circuitguy 10-11-2011 10:16 PM

You can purchase the Hummer H2 roof rack keys pre cut at any GM dealer parts dept. Just give them the four dig code on the lock cylinder, make sure to check all the cylinder codes as sometimes they are different. Its the best way and its the factory GM key so you know it will work the first time.

DeLH2 10-11-2011 11:47 PM

I have an 08 H2, but the round plate doesn't have any serial number. Do I need to take it to a lock shop?

Circuitguy 10-12-2011 05:57 AM

Never found one that did not have a number code on it. Its on the lock cylinder to the left or right of the key hole.

DeLH2 10-12-2011 08:57 AM

2 Attachment(s)
I've checked again and no number code on both racks and on both side of each rack, see pic below, is there another location that it would be engraved??

Attachment 15127

Attachment 15128

hollywood_x 10-18-2011 05:56 PM

I'm in need of a E001 key, PM me if you have one you want to sell please.

H2CANEPADESIGN 10-20-2011 12:02 PM

Just bring that code into a gm dealer. they only cost a few bucks to get the keys, they will need the code though on the lock.

hollywood_x 10-20-2011 12:05 PM

Can't, they are on a national back order apparently. I have actually tried to buy several different parts over the last 2 weeks and all have been discontinued or back ordered.

Circuitguy 10-21-2011 05:43 PM


Originally Posted by DeLH2 (Post 262385)
I have an 08 H2, but the round plate doesn't have any serial number. Do I need to take it to a lock shop?

If there is no ID number on the lock cilinder then the roof rack bars are aftermarket not factory GM. You will most likley need to go to a lock smith to get a key cut for this.

Circuitguy 10-21-2011 05:45 PM


Originally Posted by DeLH2 (Post 262398)
I've checked again and no number code on both racks and on both side of each rack, see pic below, is there another location that it would be engraved??

http://img.photobucket.com/albums/v6...Picture015.jpg

http://img.photobucket.com/albums/v6...Picture014.jpg

These are aftermarket not factory GM.

Circuitguy 10-21-2011 05:49 PM


Originally Posted by hollywood_x (Post 262954)
Can't, they are on a national back order apparently. I have actually tried to buy several different parts over the last 2 weeks and all have been discontinued or back ordered.

The factory Keys are still available from the dealer but the factory H2 roof rack bars are discontinued and no longer available from GM. Your other choice it to go with the aftermarket brand, its very hard to tell the difference.

DeLH2 10-21-2011 05:59 PM


Originally Posted by Circuitguy (Post 263060)
If there is no ID number on the lock cilinder then the roof rack bars are aftermarket not factory GM. You will most likley need to go to a lock smith to get a key cut for this.


Thanks, I took it to a local locksmith a couple days ago and they pulled the cylinder and created keys for it. They said the cylinder is similar to ski racks locks.

hollywood_x 10-22-2011 08:54 AM


Originally Posted by Circuitguy (Post 263062)
The factory Keys are still available from the dealer but the factory H2 roof rack bars are discontinued and no longer available from GM. Your other choice it to go with the aftermarket brand, its very hard to tell the difference.

Just going by what my local dealer told me, along with gmpartsdepartment.com and gmpartsdirect.com all say the same thing

Supplier Comments:
10/17/11 12:15 PM - YOU HAVE VERIFIED WHAT CODE YOU NEED?
10/18/11 12:18 PM - KEY CODE E001 PART #88980076 THIS ITEM IS ON NATIONAL BACKORDER. I DO NOT HAVE A ETA.


All times are GMT -5. The time now is 04:09 PM.


© 2024 MH Sub I, LLC dba Internet Brands