Interior paint color?
#3
SEM typically makes the best interior paints for automotive plastics but they might not have an exact match. Might have to contact them with the trim color codes from your RPO code label to see if they have a recommendation. For the wheat interiors the codes are
502 TRM M TRIM COMBINATION LEATHER, LT WHEAT (2) (99)
50I CCM M INTERIOR TRIM LT WHEAT (99)
I'm not sure what the codes are for the ebony interior. Also GM does not list a specific color code for the dark grey metallic trim around the dash and console. I did find an off the shelf rattle can color that matched that pretty good a number of years ago but stupid me forgot to document it and I cannot find the can in my shop.
502 TRM M TRIM COMBINATION LEATHER, LT WHEAT (2) (99)
50I CCM M INTERIOR TRIM LT WHEAT (99)
I'm not sure what the codes are for the ebony interior. Also GM does not list a specific color code for the dark grey metallic trim around the dash and console. I did find an off the shelf rattle can color that matched that pretty good a number of years ago but stupid me forgot to document it and I cannot find the can in my shop.
#4
Tan / WA504F Medium Wheat (Interior)
Black / WA167AEbony (Interior)
Gray / WA104D Opal Gray (Interior)
Black / WA167AEbony (Interior)
Gray / WA104D Opal Gray (Interior)
#5
i used rust-oleum universal metallic paint & primer in one
https://www.rustoleum.com/product-ca...tique%20Nickel
Flat Antique Nickel 271474 for the dash pieces.
the color is just a touch lighter then the stock but finish is dead on.
https://www.rustoleum.com/product-ca...tique%20Nickel
Flat Antique Nickel 271474 for the dash pieces.
the color is just a touch lighter then the stock but finish is dead on.
#6
sem makes a couple that are close. Sem adheres great to plastic trim. I've painted a few leather steering wheels and they've held up great. I also painted all the exterior black trim on my H2 with sem trim black. It still looks great.
Last edited by fastNYsix; 02-17-2022 at 10:36 AM.
#9
the color i have not found is the one for the vents. its a darker color.
Last edited by bronxteck; 02-18-2022 at 09:56 AM.
#10
'There's an App for That'
I use SW for all paint matching, never disappointed! When I do minor repairs and need to match the paint I cut a sample of the paint and take it to the store for them to match. Don't cut the dash/panels. ColorSnap, or take a panel to the store for them to scan/match. Make sure to get the proper paint. ( )Last edited by hummerz; 02-18-2022 at 07:45 PM.