H2 wont start!!!!
Anybody....please help!!!
I notices a Blue LED Blinking at the most left edges of Dash driver side(near to windscreen). Its never blink before.
Can anybody explain what light is it? Is it OEM or Aftermarket?
I swap the starter relay and still no crank. But when i direct wire from battery + terminal to the starter relay,its start. What could be the problem?
I notices a Blue LED Blinking at the most left edges of Dash driver side(near to windscreen). Its never blink before.
Can anybody explain what light is it? Is it OEM or Aftermarket?
I swap the starter relay and still no crank. But when i direct wire from battery + terminal to the starter relay,its start. What could be the problem?
I have a small blue light (never been lit) left of the steering wheel on dash I assumed it was part of aftermarket alarm/remote start, I don't know because I bought it with fuse pulled for this because guy I got it from supposedly lost keyfob for it, does your have an aftermarket alarm/remote start?
the day i bought the car before it its come with VIPER alarm remote but its doenst work anymore so i just use the key. I bought the car direct from used car importers so i got the car "as what it is basis". it doest give me a headache for the 1 year of ownership but after a year the problem comes...
This problem come after battery drained out.
Which fuse did the guy remove?
http://www.viper.com/ShopViperProduc...?ItemCode=479V
This problem come after battery drained out.
Which fuse did the guy remove?
http://www.viper.com/ShopViperProduc...?ItemCode=479V
Last edited by S Reynold Gudam; Sep 3, 2013 at 08:13 AM.
mine is supposedly a viper as well, I bet that what blue light is for, im not sure which fuze he told me about it when I was buying it, have had it like 3 weeks, the fuze panel on drivers side, the one that has the cover that pops off on the side of dash board has a button and an on off toggle switch there, they are definitely part of aftermarket install, open that panel and see if the toggle was installed there for yours and trying turning it off
the battery draining out might have set or reset something having to do with remote start/alarm, im taking mine to a pro to have my system looked at to see if it will work...im thinking you might want to call your local viper place or there help line and tell them the problem, I bet it has to do with that
aHAh.....after several troubleshooting i manage to get the alarm off...
You need to find where is the location of VELET SWITCH.
Steps are:
Open the door(let it open)
Turn your key to on possition(dont crank),Within 5 seconds press, release, press and hold the velet switch for 5 seconds. The Blue LED will turn off... Turn off the key and thats it!!!!!!
Start your beast back and it should be crank and roar!!!!
Hope this help others later!!!!!!
You need to find where is the location of VELET SWITCH.
Steps are:
Open the door(let it open)
Turn your key to on possition(dont crank),Within 5 seconds press, release, press and hold the velet switch for 5 seconds. The Blue LED will turn off... Turn off the key and thats it!!!!!!
Start your beast back and it should be crank and roar!!!!
Hope this help others later!!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
real7446
PRIVATE For Sale / Trade Classifieds
2
Jan 5, 2008 07:47 PM



