Blower Motor Pigtail
 

Hey all, I’m looking to see if anyone may have or knows where I could get the original female 3 pin connector that plugs into the blower motor resistor. I cut mine off a few years ago to replace with the “updated” version of the resistor but I have had to replace it 3 times so far, so this time I got a GM resistor and don’t have the original plug to wire back in. Any help is much appreciated.

Junk Yards from GMC Yukons, Denalis, Escalades.

Yeah figured that might be the only place, figured I’d check with the all knowings here! Thanks Sam!

One of the links below might help you:-

Autozone
longue

Let me know if it does:)

Plenty available on EBAY



https://cimg6.ibsrv.net/gimg/www.hum...599e4e468d.jpg
https://cimg7.ibsrv.net/gimg/www.hum...3ac4f9965c.jpg

@hummerz you're the man👍

Will we ever know if our advice was successful ?

Oh for sure, once I get the part in I will test fit and let you all know, and give the proper wiring order as well. Thanks all!

After replacing the updated resistor twice with still having blower problem, looking to change 5pin back to old 3 pin but need help with wiring. The pigtail is all gray color wires. A guidance would be appreciated.

https://cimg1.ibsrv.net/gimg/www.hum...0c18bdb651.jpg

Awesome!! Thanks a million~