Hey guys,

I am having my tires changed and am going to break the wheels down and would like to send the face and caps sent off to get refinished to be as close to factory as possible.

Does anyone have some shop suggestions?

pics attached to show what I’m dealing with.

 

The caps are plastic, not sure you can re-finish them. Looks like mainly clear coat peeling. There are numerous wheel repair franchises that can do the work.

 

Forgive me, I was talking about the small plate/disc (I referred to as caps), covering the CTIS lines, not the stud caps. My fault on that. In regards to getting the work done, George over at Spartan gave me a shop suggestion one of his customers previously used with good results and they got back to me and said they couldn't work on these wheels, not even just the face. I have posted to the FB groups as well and each suggestion I've gotten either says they can't or they won't, so I figured I'd roll my dice here.

Either way, I appreciate your response. Thank you.

 

worst scenario mate get them powder coated.

 

Talk to Dave at www.hummerpartsguy.com He might can help you out.

 

I will send a message his way now. Thank again to you all for the input and suggestions.