Train Horn Mounting in SUT
 

I have seen how other people have posted their horns before but I am looking for suggestions on a possible bracket design that will hold the compressor and tank so they don't have to be mounted directly to the wheel well.... below are pictures of the items I plan on using as well as some previous pictures from other installs.

any info or suggestions would be appreciated.

http://wakeland.us/pics/horn_compressor2.jpg

http://wakeland.us/pics/horn2.jpg

These are the horns I am going with

http://mypushcart.com/230listing/230header2.jpg

I am adding triple solenoids and will be running 2 3/8" Braided Lines from the tank thru the Drain hole... one will power the horns and the other is planned for running a second line with a quick connect for airing up and using a ratchet if works

http://www.mypushcart.com/230listing/sep2.jpg

I am going with a 3 gallon tank

https://i21.ebayimg.com/04/i/06/f3/1d/0c_1.JPG

and a Air Zenith Compressor with a 175 psi pressure valve on the tank

http://www.air-zenith.com/images_u/8...MAZ-OB1-R5.jpg

RE: Train Horn Mounting in SUT
 

any clip of the sound