LED roof bar installed
 

Finally got the roof bar and grill lights installed

Just test it and the light output is impressive
The 2 led lights are tilted down . More to light up 15 ft in front the truck
The roof bar goes about 500 ft easily . It is an Auxbeam 52 inches straight bar with 300 w flood and spot .
Attachment 9349

Attachment 9350

Attachment 9351

Attachment 9352

Attachment 9353

Looks nice! I like how you have it mounted on the cross rails. My truck doesnt have the cross rails so i have been trying to figure out how to mount one.

Did you get your other electrical issues solved?

The guy told me there are a brackets which could be mounted on the side behind the doors .
Also he said that a hole could be drilled on the roof which I wouldn't do it .

If yo go for the side bracket make sure the light is wide enough to fit . The 52 doesn't get to the side as you can see

Those drl's look nice where'd you buy them?

You won't belive it .
I bought the cover , cut the outside drill couple holes on the legs run a wire on the side to the back and attached to the screws

It came out so good that even in the accessories shop the guy was wondering how I manage to install a fog lamp in there
If you see it close it is cheap but unless pay very good attention it looks like a fog lamp

awesome work dude!

Looking good man!

I hate you










good job!
:D

:d:d:d

Looking good!

that looks nice where did you get the lightbar from ???

How's the wind noise from it?

I got it directly from auxbeam . Much cheaper than amazon . They were offering a coupon ending paying around 170 if I remember

So far no problem with wind , I read lot of complains about the lamp whistling but I guess it may be the side mounting bracket
Which I didn't use

Nice one. Looks like a good alternative to expensive Rigids. Keep us posted regarding the durability of your LEd bar.

I got an auxbeam one and no problems touch wood, bought it middle of last year. I have mine mounted on the front of an oem roof bar. You do get some noise with the sunroof open but not noticeably more than with the existing bars on there. Well pleased for the money. Rigid look well made, but how often are you driving around with them on to justify 5-8x the cost. Didn't use the existing side brackets, had someone fab some up.

DRl to fog
 

Hi, would like to know what fogs u put in place of the DRL...and do they work nice to light the front up...my HID in the headlights are just ok. Need somthing so I can actually see at night

Those are the OEM Drl with a Piaa cover . I put a Led bulb ( )which works very good but the light output isnt impressive.
It helps but I dont think it os a huge difference. I got it mostly to match the 6000k from the headlight

You can just replace the bulbs for the LED but If you need extra real light then go for the work lights such as the one I had installed on the grill ( https://www.amazon.com/gp/aw/d/B00G6...?ie=UTF8&psc=1 ) Those are powerful .
The one I got from Amazon are great but I will replace it for the Auxbeam when have a chance to match the roof bar

I really liked the way this guy mounted a smaller bar in the grille. I've never seen it done anywhere else on the 'net.

Rigid Industries LED lighting

Led
 

Yes that looks Awsome...but where can we even get that mount and led bar now
The original site is not there anymore

Led in drl
 

I put matching led in running lights when I did Hid for the head lights.nthey do nothing but ligh up...and after a year the little LED's stop working in spots

Wiring the lamp Attachment 9438

Attachment 9439

Led light bar
 

Thanks for the pics!

It is a really cool lightbar here. I've recently got a 24 inch LED lightbar from http://www.ledoutfitters.com website for my car, and I want to install it today. I hope it will give me such good results too :)

Check out G2 Leds | G2 Led lights they have some nice brackets for H2's

@H2Miami

What kind of roof bar have you mounted the LED light bar to?
Saw on your pics that the first of the three roof bars has 4 rectangle holes in the front - is that one of the original H2 bars or aftermarket?

Thanks

Lars

My H2 came with the light roof bar . There were 4 small lights installed which after removed leave the rectangle hole you see on the picture .
I just attached with screws the Light bar to the roof bar using the provided brackets
That way no extra high clearence needed when going in tight space

Btw I just came from Tennessee mountains where I use the ligth a LoT and I can tell you it is great ,
Check the video.. The cam doesn't make justice to how long ahead you can really see with the bar on


I strongly recommend this brand . Auxbeam
And I got it from their website which was a few bucks cheaper than even Amazon

+1 for auxbeam. Am running a 50" also...