Keyless remotes??
 

Hi,
I would liek to buy a few extra remotes?> Dealers want too much for these? Are they hard to program? And what the best to buy? thanks

RE: Keyless remotes??
 

I see them on ebay all the time, around 20 bucks a piece or so. Good luck

RE: Keyless remotes??
 

I own the popular internet site www.gmpartshouse.com and am a fellow forum member. I'd be happy to assist you with a good price on the fob but these have to be programmed by the dealer, but at least you'll save money on the fob.

RE: Keyless remotes??
 

what do you do? do you have to program it yourself or do they?

We offer a wide selection of original manufacturer keyless entry remotes (RKE, fobs) at discount prices. In most cases you can also program the remote yourself with our easy to follow programming instructions. Please visit our website at
http://www.carandtruckremotes.com/

If you have any questions or have any specific inquiries about your remote system please contact us at customercare@carandtruckremotes.com including year, make and model of your vehicle.
You can also view our FAQ page for answers to common questions. Link below
http://www.carandtruckremotes.com/faq.html

Best Regards
Customer Care
http://www.carandtruckremotes.com
http://www.newkeylessremotes.com
http://www.keylessentrystore.com

reance:

Do NOT post any more keyless remote business links. Violation of Forum rules.

If you would like to advertise, please see the Admin. about becoming a sponsor or advertiser. I left your posts as they mey help a member with a lodt or broken remote, but posting more will result in getting kicked.

Thank you for your anticipated cooperation in this matter.

For those of you who want information on programming keyless entry remotes for your 2007 H3, here are the instructions sent to dealers on how to program the remotes. Please note: not mentioned in the instructions is the fact that you must use a TECH II programmer that costs about $1500 on ebay. However, if you have the money to play with, buy one on ebay, program your remotes and all of your friends, then resell it on ebay again.
Here are the dealer instructions:

2007 HUMMER H3 [5GTDNXXXXXXXXXXXX] | H3 (VIN N) Service Manual | Document ID: 1547607
Remote Control Door Lock Transmitter Programming
Important: Up to 4 transmitters can be programmed. Do not operate or program the transmitters in the vicinity of other vehicles that are in the keyless entry program mode. This prevents the programming of the transmitters to the incorrect vehicle. The order in which the transmitters are programmed is important. The first transmitter programmed will be transmitter #1, and the second transmitter programmed will be transmitter #2. Use care to program the transmitters correctly.
Important: All key fobs must be programmed each time any one fob is programmed. The scan tool must stay connected until all of the transmitters are programmed.
1. Install a scan tool and navigate to the BCM Module Setup menu.
2. Select Program Key Fobs.
3. Follow the scan tool on-screen directions.
4. When the programming operations have completed, operate the transmitter functions to verify correct system operation.

Hope this helps you guys who have been searching for information like I have. Lucky for me, my brother works for GM and can borrow a Tech II for a weekend programming party.