Height level prob after replacing air ride suspension
 

After i had the mechanic replaced my air ride suspension to coil spring i noticed that the height level is not the same the rear is way higher than the front, is there something the mechanic forgot to do?

You can crank your torsion bars to level it...make sure you get an alignment after you do it.:)

This ^

I had to turn mine up all the way for level.

Thanks guys for the reply by the way is that something that i can do on my end or do i need a professional mechanic to do it....

Just get it on flat ground, measure the height and adjust. I would recommend you spay the adjusting bolts & use an impact. Not that you can't turn them with a big ratchet but an impact is less stressful on the bolts.