I recently started up my 2009 H3 Truck to find fuel was pouring out of the fuel line. In going to the dealership, I was able to get the truck schematic and identified the fuel line in the schematic (#17) and the part number 94709910, however, the dealership said this part has been discontinued. I have also ordered this part from two different online retailers only to find out that they do not have any in stock. I am hoping someone can tell me where I can find the part or an alternate part that can be used, short of going to a junk yard. I attempted to attach the schematic of the engine and frame but the file is too large. Any help is much appreciated.

 

Drawings are all on line, all you have to do is cut and paste the URL into the little window that pops up after clicking the yellow pic icon box above.


I would go old school and use the telephone following a Google search of the part.

Another option if there is a leak (fracture) in the fuel line metal tube, cut on both sides of the leak, use a short piece of rubber type fuel line with SS hose clamps to slip that on each end of what you cut out and tighten. Parts are at any auto supply, under $10 permanent fix.

 

Part is on national back order.

Take Docs advise or go get a custom one built by someone who builds furel lines for a living.
They should be able to use the old ends and make exactly what you need. I've had customs lines bent for a few muscle cars over the years.