Crap, sorry man I totally forgot. Between this damn school my friend suckered me into and having to resolder the plumbing to my house coming from the water main I didn't have time to take pics.


The side windshield trim has 2 screws. Open the door and you will see them. Take out those 2 screws then the weatherstrip at the bottom is attached to the trim by a tab. You need to pull the weatherstrip forward and release it from the small tab and the trim will come right off. You'll see a nice big channel next to the windshield where you can run wires down.


For the cowel cover (box on each side) those just pop off with push tabs. Use something non-marring to pry up each side and it should release. The first time I took one of mine off I broke one of the tabs so be very careful!


I'll try and get those pics tomorrow!

Thanks for the instructions. Pics would be awesome when you can. I'd like to see the wires going into the channel on top your rig, a picture of your relays in the engine bay, and a pic of your switches.

Also - can you tell me the specific relays and switches you are using?

Thanks!

This is the bundle of wires from my roof rack going into the corner marker light trim. The wires run along side the marker light and down the windshield trim:


Attachment 12103


The bundle comes down under the cowl, I pushed the hood weatherstrip back just a bit so I could bring the bundle over and into the engine compartment:


Attachment 12104


Here's one of the relays, I couldn't get a pic of all of them. I have a total of 5 relays back there:


Attachment 12105


The wiring harnesses are actually from my cheapo ebay lights I installed on my rack. They came pre-wired with a switch and relay:


Attachment 12106


Pretty sure you can buy those anywhere.


Here is my switch panel I made:


Attachment 12107


Attachment 12108


Let me know if you have any other questions!

Very much obliged! Thank you sir.

Very nice and clean. I just installed a small lighted switch in mine for my drl to offroad light conversion but you have taken it to the next level. good job.

I picked up a 50" LED bar from GG-lighting.net and will be wiring it tonight after the kids go to bed. It's already mounted to my roof rack, looks sexy.

Can't wait to get some juice to it. I'll post up a review once I do. I got a refurbished 50" for $350. New he sells them for $600, still a good price for the amount of lumens.

Installed pics. It's extremely bright. Very happy with this product.

Attachment 12092

Attachment 12093

Attachment 12094

looks good! I really want to replace all my cheap ebay lights on my rack but I just can't justify the cost of all those LED's right now. It'd be more than I paid for my GOBI.

I guess even at $600 for on 50", by the time you add a few more you have dropped a bit of cash on lights.

I want a 20" for the front grill and another 20" for the rear of the roof rack.

Though the 20" bars from GGlighting are $175 each, pretty affordable.

That's not too bad. I was thinking of doing 4-12" bars for the front instead of 1 bar. I've always been trying to find a pair of small bars that would work on the rear of a stealth gobi but there isn't much height back there.