Roof marker lights
#1
Roof marker lights
OK I know there is always a thread for this but it was several years old, so my question is how to install roof marker lights on my h3. I currently have the off road lights now but I want to have the roof marker lights like the h2s. How would I go about installing them and where to get them and what kind? Thanks to anyone who can give their input. I am also a new member and look forward from hearing from y'all!
#3
Before first.
A Mod has to move your thread out of the new member section (which is for saying hello I am a new guy and not for anything technical) to the H3 section where....................
yep..................
H3 related questions go.
Good luck.
A Mod has to move your thread out of the new member section (which is for saying hello I am a new guy and not for anything technical) to the H3 section where....................
yep..................
H3 related questions go.
Good luck.
#4
Roof Marker Lights
I made my own. $100
https://www.hummerforums.com/forum/h...e2/#post224543
Made my own rears too.
https://www.hummerforums.com/forum/h...-lights-21911/
https://www.hummerforums.com/forum/h...e2/#post224543
Made my own rears too.
https://www.hummerforums.com/forum/h...-lights-21911/
Last edited by Broken Halo; 06-28-2017 at 08:34 AM.
#5
Halo, he currently has the OffRoad lights as stated in his original post.
He will have to fill the Riv-nut holes and paint in order to perform your mod.
I believe hayitstyler is thinking it will be an easy swap not knowing that the clearance lights are very expensive, no longer produced and very hard to come by. He will also have to rewire the lights if he can find a pair to work with the driving lights.
He will have to fill the Riv-nut holes and paint in order to perform your mod.
I believe hayitstyler is thinking it will be an easy swap not knowing that the clearance lights are very expensive, no longer produced and very hard to come by. He will also have to rewire the lights if he can find a pair to work with the driving lights.
#6
I was thinking he could possibly mount the individual lights on top of, or behind the OEM offroad trim pieces. Don't know how the spacing would work out with the offroad lamps?
Last edited by Broken Halo; 06-28-2017 at 11:18 AM.
#9
If you already have the OffRoad lights you can do this too. A buddy of mine on clubhummeroffroad.com did this and I think it loos great. Even up close.
Removal of the A pillar trim is very easy. Open the door, Remove the 2 Phillips screws, pop the hood and gently pull up on the engine vent (fake air cleaner). Make sure you don't smash the hood with the vent. Then gently pull on the trim. you have enough room to run multiple smaller gauge wires under the a pillar trim.
Removal of the A pillar trim is very easy. Open the door, Remove the 2 Phillips screws, pop the hood and gently pull up on the engine vent (fake air cleaner). Make sure you don't smash the hood with the vent. Then gently pull on the trim. you have enough room to run multiple smaller gauge wires under the a pillar trim.
Thread
Thread Starter
Forum
Replies
Last Post
jamiw
PRIVATE For Sale / Trade Classifieds
3
02-24-2016 11:22 AM
bobopotato
PRIVATE For Sale / Trade Classifieds
27
07-30-2011 09:09 AM
jeffwhiteis
PRIVATE For Sale / Trade Classifieds
0
02-06-2011 04:20 PM
CruisinCarAudio
PRIVATE For Sale / Trade Classifieds
1
05-25-2006 04:14 AM