Hey, I'm new here and need some help.
I'm planning on cranking the torsion bolts for a level ride next weekend. I need to know if 325/60/18 nitto terra's on 18'' eagle alloy wheels will fit. Im not concerned about the hieght as much as I am with the width (12.83''). Will I need spacers or will they work without? Im fine with a little rubbing at full lock, how much would these rub?

I've searched for a couple hrs now and cant find any answers from older posts.

 

You need to be more concerned with the wheels than the tire size.

You need to choose the correct offset & backspacing, and don't forget that H3 wheels are hub centric NOT lug centric, so the center bore must be the correct size.

I really can't help you with what those numbers should be. I prefer the OEM wheels and never had to figure it all out. Others should chime in.

I am not a fan of spacers either.

 

Until cruising the forums I was never aware so many peeps in TX (you know the manly AMERICAN Lone Star state) were so fond of rice rubber?

 

I have 325/65/18s on 18x9 rockstars with 5" backspacing and they fit fine.

 

sweet, just trying to make sure i wont need any extra parts since i already have the wheels and tires. i got some new shocks on the way that are 2'' longer than the factory ones.
thanks for the help guys