PRIVATE For Sale / Trade Classifieds Sell/Trade your stuff for free! NO COMMERCIAL POSTS!
Sponsored by:
Sponsored by:

Is it difficult to replace brakes

Thread Tools
 
Search this Thread
 
  #1  
Old 04-17-2009, 04:57 PM
moho's Avatar
Junior Member
Thread Starter
Join Date: Apr 2008
Location: RI
Posts: 17
Default Is it difficult to replace brakes

I need to replace the right-front brake set: pads, rotor and caliper, plus the rear two pads. The dealer quotes me $1500. I am planning to do it by myself. Is it difficult to do?

Hummer H3 2006.
 
  #2  
Old 04-17-2009, 05:18 PM
SCOT's Avatar
Senior Member
Join Date: Mar 2009
Posts: 134
Default

why do you have to replace a caliper already? i dont know the hummer brakes but chevys are easy to do, some basic tools. good luck
 
  #3  
Old 04-17-2009, 05:30 PM
moho's Avatar
Junior Member
Thread Starter
Join Date: Apr 2008
Location: RI
Posts: 17
Default

HI, Scot. Thank you for your reply. Well, they told me that I didnot replace my pad in time (I have been super busy until two days ago). So the all the brake fluid had leaked out and the caliper was also damaged. Anyway, The parts are not that expensive. I think it boils down to if it is difficult to replace them.
 
  #4  
Old 04-18-2009, 05:31 AM
SCOT's Avatar
Senior Member
Join Date: Mar 2009
Posts: 134
Default

if you dont have tools get them at harbor freight a vacuum device for your brake caliper change would be nice, it'll bleed brakes easier, as far as changing the brakes thats easy enough, hand tools and a little thought and some bandages.
 
  #5  
Old 04-18-2009, 05:55 AM
Carcrazy's Avatar
Banned
Join Date: Mar 2009
Posts: 79
Default

don't take risk contact a mechanic and change the brake
 
  #6  
Old 04-18-2009, 11:41 AM
moho's Avatar
Junior Member
Thread Starter
Join Date: Apr 2008
Location: RI
Posts: 17
Default

Thank you Scot. I will try that on my real pads.
Carcrazy, thank you. I think I will work with a mechanic on the front work.
 
  #7  
Old 04-18-2009, 01:12 PM
lucky19942001's Avatar
Senior Member
Join Date: Jan 2008
Location:
Posts: 358
Talking

never changed brake pads in my life and i just finished my first brake pad install. the dealer told me i would need some rear pads soon and they said ceramic was $275 and metallic $360 well it cost me $60 total parts for rear brake pads,cleaner,greaser and a c-clamp and this was so easy i could not believe that they where going to charge me that much for so little work. took me longer to take the tire off and put back on then changing the pad. peace out and like i always say HUMMER ON
 
Attached Thumbnails Is it difficult to replace brakes-dscf0451.jpg  
  #8  
Old 04-18-2009, 02:18 PM
JGBB04's Avatar
Senior Member
Join Date: Jan 2009
Location: Florida
Posts: 292
Default

It's not that hard & someone did a how to post w/ pics but I can't remember if it was on here or HXC or CHO
 
  #9  
Old 04-18-2009, 05:00 PM
lucky19942001's Avatar
Senior Member
Join Date: Jan 2008
Location:
Posts: 358
Default

the post that is on this site with pics are for the front set,but u don't need any for the rear set
 
  #10  
Old 04-18-2009, 05:01 PM
moho's Avatar
Junior Member
Thread Starter
Join Date: Apr 2008
Location: RI
Posts: 17
Default

Lucky19942001, Thanks. I am pretty handy. Maybe I should pursue your road.
JGBB04, as a matter a fact, I just did a google search and found that. It does not look that difficult.
 


Quick Reply: Is it difficult to replace brakes



All times are GMT -5. The time now is 03:05 AM.