Torque converter info plz

Reply Subscribe

Thread Tools

Search this Thread

#11

11-27-2014, 07:43 PM

Nate2106

Senior Member

Thread Starter

Join Date: May 2013

Location: Rhode Island

Posts: 137

Quote:

Originally Posted by MVR 155

If you are planning to supercharge for sure later make sure to keep that in mind when you make your final decision to select a stall converter. The extra power/torque of the charger will have your converter flash higher. I personally don't think that running a higher stall converter on a heavy rig like this is a good idea, a lot of driveline parts that will see extra stress and if you tow there is going to be a lot of additional heat build up.

flash higher? I'm only going 300RPM's higher then stock. I do tow my trailer, so I will defiantly be looking into a better trans cooler to keep the heat down. Changing up the difs as well.

#12

11-29-2014, 09:43 PM

woodwardsh3

Senior Member

Join Date: Apr 2014

Posts: 229

Most needs for a higher stall are due to a larger cam install. and you need a looser converter to allow the engine to idle in gear. your stall should be chosen to work the power band of your cam.