PRIVATE For Sale / Trade Classifieds Sell/Trade your stuff for free! NO COMMERCIAL POSTS!
Sponsored by:
Sponsored by:

too lean at high RPMs. Tried lots of things. Ideas?

Thread Tools
 
Search this Thread
 
  #1  
Old 03-21-2013, 10:32 PM
rpalatine's Avatar
Junior Member
Thread Starter
Join Date: Jan 2013
Posts: 18
Default too lean at high RPMs. Tried lots of things. Ideas?

Hi, My 2006 H2 with supercharger, headers, cam swap runs lean on the dyno at high rpms. We've tried Boost-A-Pump, new stock fuel pump (old one had 85k miles) but nothing. Any ideas? thanks!
 
  #2  
Old 03-22-2013, 10:43 AM
rpalatine's Avatar
Junior Member
Thread Starter
Join Date: Jan 2013
Posts: 18
Default update

just leaving a trail so folks coming after me know what happened when they find my skeleton at the end of the trail. The hypothesis now is that the problem seems to be caused by fuel delivery. The stock pump cannot keep up to the power level. So we're modifyng the fuel bucket to accept an Aeromotive 340 pump and with the addition of the boost a pump we're hoping it's good.
 
  #3  
Old 03-22-2013, 11:20 AM
H2CANEPADESIGN's Avatar
Senior Member
Join Date: Jan 2011
Location: N. Hollywood, CA.
Posts: 614
Default

Mine is supercharged also. I have the Magnuson kit. There is a Secondary fuel pump that runs inline with the stock pump to increase fuel pressure. the kit came with bigger injectors and fuel rails. Summit racing sells walbro hi-pressure inline pumps. I believe that mine was a gsl391? When my stock pump failed @ roughly 100k I replaced both of them. the second time around I used a GSL392. The first one pumps roughly 190 liters per hour. the second was around 255 liters per hour so no fuel starvation issues and it helps keep internal engine temps down.
 
  #4  
Old 03-22-2013, 11:22 AM
H2CANEPADESIGN's Avatar
Senior Member
Join Date: Jan 2011
Location: N. Hollywood, CA.
Posts: 614
Default

They do whine a bit when they get hot. try to mount it in an area that is not near anything that radiates heat or heat wrap the pump before you mount it if that is unavoidable. I mounted mine above the front cross member and wrapped it.
 
  #5  
Old 03-24-2013, 03:40 PM
rpalatine's Avatar
Junior Member
Thread Starter
Join Date: Jan 2013
Posts: 18
Default thanks

We'll see what happens
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
topkicktech
PRIVATE For Sale / Trade Classifieds
54
11-25-2011 02:41 PM
Brianb
PRIVATE For Sale / Trade Classifieds
9
08-20-2010 09:09 AM
psych0
PRIVATE For Sale / Trade Classifieds
9
04-28-2010 07:25 PM
2007H3
PRIVATE For Sale / Trade Classifieds
12
06-18-2007 11:10 AM
bmbenear
PRIVATE For Sale / Trade Classifieds
6
01-01-2007 05:56 AM



Quick Reply: too lean at high RPMs. Tried lots of things. Ideas?



All times are GMT -5. The time now is 07:30 PM.