PRIVATE For Sale / Trade Classifieds Sell/Trade your stuff for free! NO COMMERCIAL POSTS!

Engine will not roll over. Help

Thread Tools
 
Search this Thread
 
  #1  
Old 03-18-2015, 01:57 PM
RMB1234's Avatar
Junior Member
Thread Starter
Join Date: Mar 2012
Posts: 3
Default Engine will not roll over. Help

2005 Hummer H2. Started off with noticing that the tach was fluctuating even though engine speed was steady and A/C stopped cooling. Pulled over to check it out and the blinkers weren't working. Shut engine off and went to restart it, but it would not do anything. The starter never tries to turn. The gauges all work but nothing happens.Battery is good. I finally just turned key on and touched a screw driver to starter positive and the solenoid and the engine cranked right up. Tach still fluctuating and A/C not working and blinkers still not working. I checked for codes and had a code P0165. Any ideas????
 
  #2  
Old 03-18-2015, 02:00 PM
mcioci's Avatar
Senior Member
Join Date: Aug 2010
Posts: 776
Default

Originally Posted by RMB1234
2005 Hummer H2. Started off with noticing that the tach was fluctuating even though engine speed was steady and A/C stopped cooling. Pulled over to check it out and the blinkers weren't working. Shut engine off and went to restart it, but it would not do anything. The starter never tries to turn. The gauges all work but nothing happens.Battery is good. I finally just turned key on and touched a screw driver to starter positive and the solenoid and the engine cranked right up. Tach still fluctuating and A/C not working and blinkers still not working. I checked for codes and had a code P0165. Any ideas????
Possible causes
- Faulty Heated Oxygen Sensor Bank 2 Sensor 3
- Heated Oxygen Sensor Bank 2 Sensor 3 harness is open or shorted
- Heated Oxygen Sensor Bank 2 Sensor 3 circuit poor electrical connection

Read more: P0165 O2 Sensor Circuit Slow Response Bank 2 Sensor 3 OBDII Engine Light Trouble Code | Engine-Codes.com
 
  #3  
Old 03-18-2015, 03:47 PM
RMB1234's Avatar
Junior Member
Thread Starter
Join Date: Mar 2012
Posts: 3
Default

Sorry the code i had was from a previous failure that I did not clear. There are no codes and no check engine lights. I just drove it for about an hour and no codes. I can crank it up with the screw driver at the starter and it drives great other than a/c not working properly and blinkers not working. Just replaced the ignition switch and it did not help.
 
  #4  
Old 03-18-2015, 05:07 PM
RMB1234's Avatar
Junior Member
Thread Starter
Join Date: Mar 2012
Posts: 3
Default

Figured it out. It was a small 10 amp fuse that was burnt in the box under the hood. There are several fuses that have something to do with the ignition and this was one of them.
 
  #5  
Old 03-19-2015, 07:07 AM
Synthetickiller's Avatar
Senior Member
Join Date: Sep 2014
Posts: 813
Default

Amazing how a little fuse can cause so much trouble.
I bet it feels good that the problem required a simple fix.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Pauldy
PRIVATE For Sale / Trade Classifieds
5
07-15-2012 11:33 AM
TINKED
PRIVATE For Sale / Trade Classifieds
0
11-16-2008 03:29 PM
NJTEX
PRIVATE For Sale / Trade Classifieds
0
09-27-2007 01:28 PM
Patrick
PRIVATE For Sale / Trade Classifieds
32
08-16-2007 04:43 PM
Greenblade
PRIVATE For Sale / Trade Classifieds
3
06-02-2006 01:18 AM



Quick Reply: Engine will not roll over. Help



All times are GMT -5. The time now is 03:31 PM.