H3 COLD AIR INTAKE TUBE
Login  | |
|
H3 COLD AIR INTAKE TUBE - 11/1/2007 3:33:33 PM
|
|
|
hilljob26
Posts: 2069
Joined: 9/2/2007
Status: offline
|
THIS IS MY INTAKE TUBE THAT I MADE.IT WORKS QUITE WELL,HERE ARE SOME #'S FROM THE DYNO TESTING
it came in stock at 217 hp and 222 torque, this was the baseline basically
with just the k&n,it made 224 hp and 230 torque, =7hp gain 8 torque gain
with the k&n and the tube,it came in at 232 hp and 242 torque =15 hp gain and 20 torque gain
with just the tube it came in at 225 hp and 233 torque =8 hp gain and 11 torque gain
THIS IS MADE OUT OF 316 STAINLESS STEEL TUBING,IT TAKES THE PLACE OF YOUR STOCK RESONATOR BOX.NO EXTRA CLAMPS OR HOSES ARE NEEDED,I MADE THIS THAT WAY FOR A REASON.SO IT SAVES YOU MONEY
ALL IN ALL IT DOES A GREAT JOB.THE PRICE HERE IS 60 SHIPPED IN THE LOWER 48,IF YOU WOULD LIKE ONE,PM ME OR EMAIL ME AT hilljob26@yahoo.com THESE WILL FIT ALL THE 3.5 AND THE 3.7 INLINE 5
_____________________________
dont sweat the petty stuff,pet the sweaty stuff
|
|
|
|
|
|
|
RE: H3 COLD AIR INTAKE TUBE - 11/2/2007 7:36:36 AM
|
|
|
LittleWhiteHummer
Posts: 6
Joined: 9/5/2007
From: OKlahoma City
Status: offline
|
They are GREAT quality too....thanks Mike
_____________________________
l_T_T_[____]
[--H3-L-0llllll0-]
()_)"()_)*==*)_)
2006 Birch White H3
|
|
|
|
|
RE: H3 COLD AIR INTAKE TUBE - 11/2/2007 10:38:57 AM
|
|
|
hilljob26
Posts: 2069
Joined: 9/2/2007
Status: offline
|
your welcome
_____________________________
dont sweat the petty stuff,pet the sweaty stuff
|
|
|
|
|
RE: H3 COLD AIR INTAKE TUBE - 11/3/2007 9:31:54 AM
|
|
|
Hunner
Posts: 140
Joined: 9/26/2006
Status: offline
|
I have made several versions as well. Where did you find a four wheel drive dyno? If it was not too far a drive I would like to get on one to test all the mods I have made.
Next take off the wimpy snorkle and put a turbo boot also with flex hump into the fender.
Thumbnail Image
Thumbnail Image
Thumbnail Image
Thumbnail Image
Thumbnail Image
 Attachment (5)
_____________________________
08H3 ALPHA/Adv,WarnPowerPlant9500,Warn 9000ti rear,Steelcraft brush/winch mt,RockyRoadrails/Hunner mod,GMUCP,Hunner rear/shock skids,OEM roof lights,Rola rack,2GoLights,Hunner steering gear mount,Purple Cranium diff guard
|
|
|
|
|
RE: H3 COLD AIR INTAKE TUBE - 11/4/2007 8:04:45 AM
|
|
|
hilljob26
Posts: 2069
Joined: 9/2/2007
Status: offline
|
ok guys,i have 5 built and ready to go,after those are gone,i will make to order.just to keep you informed
_____________________________
dont sweat the petty stuff,pet the sweaty stuff
|
|
|
|
|
RE: H3 COLD AIR INTAKE TUBE - 11/4/2007 4:27:00 PM
|
|
|
hilljob26
Posts: 2069
Joined: 9/2/2007
Status: offline
|
if anyone wants both the shock extenders(to get there factory ride back) and the intake,i will do both for 90 bucks for the month of november
_____________________________
dont sweat the petty stuff,pet the sweaty stuff
|
|
|
|
|
RE: H3 COLD AIR INTAKE TUBE - 11/6/2007 7:26:49 PM
|
|
|
hilljob26
Posts: 2069
Joined: 9/2/2007
Status: offline
|
down to 3
_____________________________
dont sweat the petty stuff,pet the sweaty stuff
|
|
|
|
|
RE: H3 COLD AIR INTAKE TUBE - 11/7/2007 8:44:55 AM
|
|
|
HummerGuy
Posts: 6669
Status: offline
|
I'm going to attempt one this weekend possibly. I'm not going to sell it though. I've wanted to do this for a long time and just keep forgetting about it. I will have the not-so-refined version 
C'mon Doc. Care to have a little "Who's pipe is better" fabricate-off?
|
|
|
|
|
RE: H3 COLD AIR INTAKE TUBE - 11/7/2007 3:16:45 PM
|
|
|
Muddydawg75
Posts: 9955
Joined: 3/11/2007
From: South Jersey Shore
Status: offline
|
Comparing pipes is so 90's.....
_____________________________
Graphics by HUMMER DRIVER
"I feel sorry for people who don't drink. When they wake up in the morning, that's as good as they're going to feel all day." --Frank Sinatra
|
|
|
|
|
RE: H3 COLD AIR INTAKE TUBE - 11/7/2007 6:18:10 PM
|
|
|
hilljob26
Posts: 2069
Joined: 9/2/2007
Status: offline
|
_____________________________
dont sweat the petty stuff,pet the sweaty stuff
|
|
|
|
|
RE: H3 COLD AIR INTAKE TUBE - 11/8/2007 3:57:00 AM
|
|
|
HUMMER DRIVER
Posts: 447
Joined: 3/12/2007
Status: offline
|
Man I think the Hunner is on to something with that hump coupler replacing the stock snorkel. I noticed that after I installed my K&N system onto my 3.7L that I got some vibration against the fender. I only noticed it when starting up a cold engine, it would buzz either when idling or when I dropped it into reverse to back out of the garage. I finally got rid of my buzzing by repositioning the breather box just a tad farther away from the inner fender well. The breather box has that cheesy really soft foam donut gasket around it and apparently it wasn't enough to dampen the vibrations from the cold engine.
I wasn't impressed with the diameter of the snorkel that penetrates the fender wall, it looked a little restrictive to me considering the size of the K&N black intake tube. The hump coupler that Hunner came up with seems to address both issues I've have with that part between the fender and breather box. I guess the only concern is without the flared end will a regular hump coupler be more prone to picking up any water than the stock inlet.
Hilljob, thanks for the dyno report brother, nice work. Your post re-enforced my belief that the HP gains the CAI tube systems claim are split between the improved filter and the removal of the intake resonator box. I don't recall if you have a PCM tweak plus a non-restrictive exhaust, can you post if you have the PCM and exhaust or just the intake.
You know the 3.7L stock is 242/242 and I'm guessing that with the K&N CAI, PCM tweak and Magnaflow exhaust that the HP is close to 290HP. Oddly enough that HP is very close to the Alpha's V8 HP ratings. I doubt the 3.7 could ever match the torque of the V8 but I firmly believe that with proper mods it can approach the V8's stock HP. I'm sure you could tweak the Alpha's V8 and make it even better as well, it may have even better gains with those same tweaks than the I-5.
I want to dyno my setup, I remember how lackluster the original performance was out of the box, it has so much more power and acceleration now with all the updates and it runs like it should. (Still, I wish the tranny was a 6 speed auto) I need to find a 4W dyno in the Dallas metro area, I bet 4WP's guys would know who's got one. Maybe when I get back home I'll give them a call. I'd love to do a dyno test with my big tires and another one with my stock 32s.
< Message edited by HUMMER DRIVER -- 11/8/2007 4:19:49 AM >
_____________________________
2007 H3 Black/Chrome Package , SS Nerf Bars, Roof Rack, MagnaFlow, Towing Kit, HUMMER PinStriping. K&N , PCM , SS Brushguard, Backup Camera, 34" Trxus M/T & ProComp Rims.
|
|
|
|
|
Printable Version
