Factory Monsoon wiring diagram?

Hummer Forums Hummer Classifieds Photo Gallery Member List Calendars Search Forum FAQ Contact HF Sponsors
Hummer Lineup Hummer News Hummer Recalls TSBs Timeslips Register Login

Factory Monsoon wiring diagram?

Printable Version

Hummer >> Brand Reviews >> Audio Visual/Interior Modifications >> Factory Monsoon wiring diagram?

Page: [1] 2 next > >>

Message

<< Older Topic Newer Topic >>

Factory Monsoon wiring diagram? - 10/5/2007 9:10:09 AM

96TL

Posts: 13
Score: 0
Joined: 12/11/2006
Status: offline

Does anyone have a diagram for the factory Monsoon amp in the rear? I'm wiring up an aftermarket amp, and need to know the positive and negative wires for the sub input, and I also need a switched 12V power wire. Thanks!

Post #: 1

RE: Factory Monsoon wiring diagram? - 10/5/2007 11:15:36 AM

azz7772

Posts: 475
Score: 0
Joined: 1/2/2007
Status: offline

i found this link that may or may not help you worth a try

http://www.ls1tech.com/forums/archive/index.php/f-19.html

(in reply to 96TL)

Post #: 2

RE: Factory Monsoon wiring diagram? - 10/5/2007 11:18:27 AM

hilljob26

Posts: 2069
Score: 0
Joined: 9/2/2007
Status: offline

dont cut the green...............it will go ..........BOOM....LOL

_____________________________

dont sweat the petty stuff,pet the sweaty stuff

(in reply to azz7772)

Post #: 3

RE: Factory Monsoon wiring diagram? - 10/5/2007 11:20:30 AM

96TL

Posts: 13
Score: 0
Joined: 12/11/2006
Status: offline

azz7772, is there a particular thread you're referring to? Thanks!

(in reply to hilljob26)

Post #: 4

RE: Factory Monsoon wiring diagram? - 10/5/2007 11:22:08 AM

mountainbiker

Posts: 190
Score: 0
Joined: 10/28/2006
From: Wiesbaden, Germany
Status: offline

Audio Amp C1
1-TN-Left Front Low Level Audio Signal (+)
2-D.GN-Left Front Low Level Audio Signal (-)
3-D.GN/WH-Left Rear Low Level Audio Signal (-)
4-BN-Left Rear Low Level Audio Signal (+)
5-OG-Radio Mute Signal
6-PK-Radio On Signal
7-Not Used
8-GY/BK-Remote Amp Sense Line Signal
9-OG/BK-Right Front Low Level Audio Signal (-) / D.BU in early models
10-L.GN-Right Front Low Level Audio Signal (+)
11-D.BU-Right Rear Low Level Audio Signal (+) / OG/BK in early models
12-BK-Right Rear Low Level Audio Signal (-)
13 to 16-Not Used

Audio Amp C2
1-BK-Left Front Tweeter Speaker Output (+)
2-YE-Left Front Tweeter Speaker Output (-)
3-L.GN-Right Front Tweeter Speaker Output (+)
4-PU-Right Front Tweeter Speaker Output (-)
5-YE-Left Rear Speaker Output (-)
6-BN-Left Rear Speaker Output (+)
7-L.BU-Right Rear Speaker Output (-)
8-D.BU-Left Rear Speaker Output (+)
9 to 12-Not Used
13-L.GN-Right Front Speaker Output (+)
14-D.GN-Right Front Speaker Output (-)
15-TN-Left Front Speaker Output (+)
16-GY-Left Front Speaker Output (-)

Audio Amp C3
1-OG-Battery Positive Voltage
2-BK/WH-Ground
3-D.BU/WH-Left Subwoofer Speaker Output (+)
4-L.GN/BK-Left Subwoofer Speaker Output (-)
5 to 6-Not Used
7-L.BU/BK-Right Subwoofer Speaker Output (-)
8-L.BU/BK-Right Subwoofer Speaker Output (+)

On the radio should be a 24-pin connector (2-rows (A and B) of 12)
B1-OG-Battery Positive Voltage [I believe this is constant and not switched]
B3-PK-Radio On Signal (not 12v)
B6-OG-Radio Mute Signal (not 12v)

_____________________________

Hybrid Emblem ~ GM Grille Lights ~ GM Hood Insulation ~ PCM ~ SMA Light Bar ~ HitchCAM ~ Cepek Wheels ~ Dueler A/T Rubber ~ 20% tint ~ DICE iPod Adapter ~ Optima ~ "European Lights"

(in reply to 96TL)

Post #: 5

RE: Factory Monsoon wiring diagram? - 10/5/2007 11:41:53 AM

96TL

Posts: 13
Score: 0
Joined: 12/11/2006
Status: offline

Thanks mountainbiker! I really appreciate it!

(in reply to mountainbiker)

Post #: 6

RE: Factory Monsoon wiring diagram? - 10/5/2007 11:45:41 AM

96TL

Posts: 13
Score: 0
Joined: 12/11/2006
Status: offline

Are there there 3 seperate amps, or just 3 different plugs?

(in reply to 96TL)

Post #: 7

RE: Factory Monsoon wiring diagram? - 10/5/2007 1:44:03 PM

mountainbiker

Posts: 190
Score: 0
Joined: 10/28/2006
From: Wiesbaden, Germany
Status: offline

Most likely you have C1 going from your head unit to the amp and C2 leaving your amp out to the speakers.

_____________________________

Hybrid Emblem ~ GM Grille Lights ~ GM Hood Insulation ~ PCM ~ SMA Light Bar ~ HitchCAM ~ Cepek Wheels ~ Dueler A/T Rubber ~ 20% tint ~ DICE iPod Adapter ~ Optima ~ "European Lights"

(in reply to 96TL)

Post #: 8

RE: Factory Monsoon wiring diagram? - 10/5/2007 8:08:51 PM

importkiller

Posts: 7254
Score: 0
Status: offline

don't use the factory power and ground wires for a new amp!!!!! They are too small of a gauge wire and will limit your new amp.

_____________________________

(in reply to mountainbiker)

Post #: 9

RE: Factory Monsoon wiring diagram? - 10/8/2007 5:09:29 PM

96TL

Posts: 13
Score: 0
Joined: 12/11/2006
Status: offline

importkiller, I'm not. I just need to wire up an LOC to the Monsoon amp signal wires. Does anyone know an easy remote turn on wire I can tap? Thanks.

(in reply to importkiller)

Post #: 10

RE: Factory Monsoon wiring diagram? - 10/8/2007 11:30:37 PM

mountainbiker

Posts: 190
Score: 0
Joined: 10/28/2006
From: Wiesbaden, Germany
Status: offline

Pink #6 from C1 harness

_____________________________

Hybrid Emblem ~ GM Grille Lights ~ GM Hood Insulation ~ PCM ~ SMA Light Bar ~ HitchCAM ~ Cepek Wheels ~ Dueler A/T Rubber ~ 20% tint ~ DICE iPod Adapter ~ Optima ~ "European Lights"

(in reply to 96TL)

Post #: 11

RE: Factory Monsoon wiring diagram? - 10/9/2007 5:10:38 AM

96TL

Posts: 13
Score: 0
Joined: 12/11/2006
Status: offline

quote:

ORIGINAL: mountainbiker

Pink #6 from C1 harness

Thats what I was thinking, but the wiring diagram posted above says "NOT 12 VOLT" (look at the radio connector chart at the bottom). I know some new vehicles have a 5 volt turn-on system, so I'm guessing this might be the same way. It has to be 12 volts to trigger the amp. My DMM battery was dead, so I couldn't check it.

< Message edited by 96TL -- 10/9/2007 6:11:30 AM >

(in reply to mountainbiker)

Post #: 12

RE: Factory Monsoon wiring diagram? - 10/9/2007 12:02:19 PM

mountainbiker

Posts: 190
Score: 0
Joined: 10/28/2006
From: Wiesbaden, Germany
Status: offline

quote:

the wiring diagram posted above says "NOT 12 VOLT"

The "not 12v" comment was something I scribbled into my manual. Therefore, you should double-check. Let me know, so I will update my manual. If you do indeed find that it is under 12v, you could use a low voltage trigger like this one from PIE.

_____________________________

Hybrid Emblem ~ GM Grille Lights ~ GM Hood Insulation ~ PCM ~ SMA Light Bar ~ HitchCAM ~ Cepek Wheels ~ Dueler A/T Rubber ~ 20% tint ~ DICE iPod Adapter ~ Optima ~ "European Lights"

(in reply to 96TL)

Post #: 13

RE: Factory Monsoon wiring diagram? - 10/9/2007 12:10:03 PM

96TL

Posts: 13
Score: 0
Joined: 12/11/2006
Status: offline

I will let you know later tonight. I put a regular test light on it yesterday, and the bulb lit up nice and bright. It appeared to be 12 volts.

(in reply to mountainbiker)

Post #: 14

RE: Factory Monsoon wiring diagram? - 10/9/2007 12:43:44 PM

mountainbiker

Posts: 190
Score: 0
Joined: 10/28/2006
From: Wiesbaden, Germany
Status: offline

Cool. Look forward to hear how you make out.

_____________________________

Hybrid Emblem ~ GM Grille Lights ~ GM Hood Insulation ~ PCM ~ SMA Light Bar ~ HitchCAM ~ Cepek Wheels ~ Dueler A/T Rubber ~ 20% tint ~ DICE iPod Adapter ~ Optima ~ "European Lights"

(in reply to 96TL)

Post #: 15