RE: FS! 95 H1 all black

Hummer Forums Hummer Classifieds Photo Gallery Member List Calendars Search Forum FAQ Contact HF Sponsors
Hummer Lineup Hummer News Hummer Recalls TSBs Timeslips Register Login

RE: FS! 95 H1 all black

Printable Version

Hummer Forum >> Hummer Lineup >> Hummer H1 >> RE: FS! 95 H1 all black

Page: << < prev 2 3 [4] 5 6 next > >>

Message

<< Older Topic Newer Topic >>

RE: FS! 95 H1 all black - 2/21/2008 2:24:30 PM

Little General

Posts: 4
Joined: 12/21/2007
Status: offline

Check www.jkmilitary.com

(in reply to thehammerh3)

Post #: 46

RE: FS! 95 H1 all black - 2/21/2008 3:19:52 PM

Black95H1OpenTop

Posts: 16
Joined: 2/20/2008
Status: offline

Hey guys, yes I have had to do a few things to it. I had a coolant line crack and replaced with a heavier duty line, never a problem again. The heater stopped working on Chris he said the night before I picked it up. I put a new blower motor in it and replaced the fuse because it was blown so heat works again. I had a power wire under the hood break in the bad freezing weather and they replaced the fuel pump with a new heavy duty one and then found out it was just a wire so it has a brand new fuel pump even though it didnt need it. I had them upgrade the pitman arm and idler arm and do an alignment on it because in that year those were a weak point. I have fixed over $2,000 worth of little stuff to make it a great dependable H1. I have been driving it to work 75 miles round trip everyday and runs/rides great. I'm only getting about 9mpg on the gas motor but very dependable and in great shape with 75k miles. I will be losing about $3,000 with all the extra expenses but I need to get $28,000 out of it. Any questions call 618-889-9524 anytime!

_____________________________

For Sale: 95 All Black H1 Open Top 75k miles 618-889-9524

(in reply to Little General)

Post #: 47

RE: FS! 95 H1 all black - 2/21/2008 4:41:14 PM

3hummers

Posts: 11630
Joined: 9/23/2007
Status: online

Good luck on the sale.

_____________________________

2006 H1 Alpha wagon
2000 H1 Slantback
1997 H1 wagon
2008 H3 Alpha

(in reply to Black95H1OpenTop)

Post #: 48

RE: FS! 95 H1 all black - 2/21/2008 4:43:13 PM

3hummers

Posts: 11630
Joined: 9/23/2007
Status: online

Alright hammer keep us posted one what happens.

_____________________________

2006 H1 Alpha wagon
2000 H1 Slantback
1997 H1 wagon
2008 H3 Alpha

(in reply to 3hummers)

Post #: 49

RE: FS! 95 H1 all black - 2/21/2008 5:13:32 PM

Black95H1OpenTop

Posts: 16
Joined: 2/20/2008
Status: offline

Thanks, I haven't really put it up for sale locally yet but i plan to within the next week so hopefully that will go good. I haven't advertised it yet and I have had people calling me saying I heard you are the one that has that H1 and might be interested in selling it...I can only imagine once its parked for sale the response i'll get. I was notified via phone today that I no longer have a job due to my injury so I will have plenty of time to play around on here and keep you posted. That also means ill need to get it gone soon though .........

_____________________________

For Sale: 95 All Black H1 Open Top 75k miles 618-889-9524

(in reply to 3hummers)

Post #: 50

RE: FS! 95 H1 all black - 2/21/2008 7:10:49 PM

3hummers

Posts: 11630
Joined: 9/23/2007
Status: online

If you were injured on the job I would think it would be hard for them to cut you loose. The truck will sell. Some will like the interior and some won't but the price is right so it should move fairly quickly. Good luck on the sale and tough deal with the job.

_____________________________

2006 H1 Alpha wagon
2000 H1 Slantback
1997 H1 wagon
2008 H3 Alpha

(in reply to Black95H1OpenTop)

Post #: 51

RE: FS! 95 H1 all black - 2/21/2008 9:11:28 PM

thehammerh3

Posts: 314
Joined: 12/16/2007
Status: offline

Thinking thinking......

Did you add the metal for yourself or was there parts missing and you had to replace it? Did you have to cut any of the dash or did use overlays?

_____________________________

2007 Hummer h2
2006 Hummer h3 Girlfriends birthday Present

(in reply to 3hummers)

Post #: 52

RE: FS! 95 H1 all black - 2/21/2008 9:12:53 PM

3hummers

Posts: 11630
Joined: 9/23/2007
Status: online

The metal was there when Chris had the truck.

_____________________________

2006 H1 Alpha wagon
2000 H1 Slantback
1997 H1 wagon
2008 H3 Alpha

(in reply to thehammerh3)

Post #: 53

RE: FS! 95 H1 all black - 2/22/2008 11:13:19 AM

Black95H1OpenTop

Posts: 16
Joined: 2/20/2008
Status: offline

Yes, all the diamond plate was on it when I got the truck from Chris. I was honestly planning on changng the whole interior. I just had my friend that owns a stereo shop look at it to build a whole new console with arm rests and cup holders in the back and change the speaker setup and reconfigure the front setup. The diamond plate is nice but id rather have a nice clean newer look. If I still have the truck a month or so from now it will all probably be redone. I just started getting a clicking when turning left and accelerating so im guessing im about to be replacing a cv shaft as well. Has anyone had to do this and know how pricey this is? Im hoping not too bad. Now I have all this time off i can spend more time on the Hummer. By the way yes you would think since I am hurt from work they wouldn't be able to fire me but they did and they fired the Human Resources Coordinator for standing up for me. It was all for working overtime while on light duty and my supervisor had asked me to do it. Basically just an excuse to get rid of an injured worker...now they have to pay me workers comp to sit at home...lol...any questions bout the truck feel free to ask...

(in reply to 3hummers)

Post #: 54

RE: FS! 95 H1 all black - 2/26/2008 7:51:44 AM

3hummers

Posts: 11630
Joined: 9/23/2007
Status: online

Any update on the sale?

_____________________________

2006 H1 Alpha wagon
2000 H1 Slantback
1997 H1 wagon
2008 H3 Alpha

(in reply to Black95H1OpenTop)

Post #: 55

RE: FS! 95 H1 all black - 2/26/2008 5:16:54 PM

Black95H1OpenTop

Posts: 16
Joined: 2/20/2008
Status: offline

No, I haven't even really put it up for sale yet. I posted it on Mautofied.com to see what kinda offers I would get but its just sitting in my garage, not listed for sale or anything. Been busy catchin up with stuff that was behind from workin so much. Gonna try to get it up for sale before the week is over. Plus I wanna check out the cv shafts first since it sounds like one is clicking when i turn while accelerating taking off.

_____________________________

For Sale: 95 All Black H1 Open Top 75k miles 618-889-9524

(in reply to 3hummers)

Post #: 56

RE: FS! 95 H1 all black - 2/26/2008 7:16:27 PM

3hummers

Posts: 11630
Joined: 9/23/2007
Status: online

Ok. Keep us posted.

_____________________________

2006 H1 Alpha wagon
2000 H1 Slantback
1997 H1 wagon
2008 H3 Alpha

(in reply to Black95H1OpenTop)

Post #: 57

RE: FS! 95 H1 all black - 2/29/2008 4:28:51 PM

Black95H1OpenTop

Posts: 16
Joined: 2/20/2008
Status: offline

Ok so I put the Hummer on the lift and pulled the wheel off and inspected the axels and differential. Come to find out there is a bolt that goes through the planetary or gear box or whatever you prefer to call it. You remove a plug and there is a keeper bolt that threads into the axle to hold it in and the bolt broke off so the axel is popping out of the planetary. Tomorrow I am going to tear into it more. I am going the pull out the axle and make sure the teeth are not stripped on it. If not then I am going to have the bolt reversed out and just put a new bolt in it. I will keep you posted!
Matt

_____________________________

For Sale: 95 All Black H1 Open Top 75k miles 618-889-9524

(in reply to 3hummers)

Post #: 58

RE: FS! 95 H1 all black - 2/29/2008 4:41:44 PM

ronb

Posts: 138
Joined: 11/9/2007
Status: online

kind of a pain, but not too big a deal. Once you pull off the halfshaf you might be able to just work that bolt out. If memory serves it's a 9/16 bolt that is only supposed to be tightened to 30 or 40 ft/lbs. The access cover on the hub shoouldn't be too tight either -- maybe 20 ft/lbs. I can check my maint. manual to get the correct #'s if you want. It's pretty simple, just a bit of grunt and dirty.

good luck

rb

(in reply to Black95H1OpenTop)

Post #: 59

RE: FS! 95 H1 all black - 3/1/2008 12:55:41 PM

Black95H1OpenTop

Posts: 16
Joined: 2/20/2008
Status: offline

Yeah, thats what I was sayin....I've looked at it and see what I will need to do to fix it but its just a matter of doing it. I do not have the equipment to do it here at the house so I am doing it at my buddy's garage so I am at the mercy of him. We were supposed to do it today but he has decided to be missing in action today and isnt answering his phone. It has been clicking for a little while now. Do you think from experience that anything is gonna be stripped inside there from it popping out and teeth grinding? Looks like it will be a job for another day :( I really wanna get it fixed asap. I could do it at my house but it would be alot faster with airtools and a lift and now that it is at the garage I dont wanna drive it anymore than I have to so that is doesnt further destroy anything.

_____________________________

For Sale: 95 All Black H1 Open Top 75k miles 618-889-9524

(in reply to ronb)

Post #: 60