DRL's + headlights simultaneously..? (Full Version)

Hummer Forums >> Hummer Lineup >> Hummer H2

DRL's + headlights simultaneously..?

  

Ta Jay -> DRL's + headlights simultaneously..? (6/25/2006 6:01:48 PM)

I would like to have them both run at the same time. any secret way of doing this?

J

  
Linus Gump -> RE: DRL's + headlights simultaneously..? (6/25/2006 7:13:47 PM)

Aren't your DRL's your driving lights? They are in the H3. In the H3, the DRL's are the turn signal filiment in the front turn/marker light.

shortbus -> RE: DRL's + headlights simultaneously..? (6/25/2006 8:44:49 PM)

you can put a diode between your parking light relay and your drl relay to have the drls on with the headlights. during the day, on auto, only the drls are on. if this is what you're looking for, let me know, i'll tell you which relay contacts to jump between, and which way the diode goes.

H34X4 -> RE: DRL's + headlights simultaneously..? (6/26/2006 8:44:30 AM)

Hi shortbus i wired my off road light to my highbeam switch it that ok no relays

Thank You

mendez4474 -> RE: DRL's + headlights simultaneously..? (8/14/2006 3:02:26 PM)

how do you have drls and headlights on at the same time

HummerGuy -> RE: DRL's + headlights simultaneously..? (8/14/2006 4:22:35 PM)

I wired a seperate switch to my Off-Road lights. That is a great idea to wire the relay to the high-beams. I should have thought of that :) Maybe I'll do that.

envied4x4 -> RE: DRL's + headlights simultaneously..? (3/29/2007 3:03:19 PM)

how do you get the drl to work at night

HummBob -> RE: DRL's + headlights simultaneously..? (3/29/2007 3:24:38 PM)

[image]http://i97.photobucket.com/albums/l223/HummBob/untitlededit.jpg[/image]
 
Step 1: get some 20g wire, a 200v 1amp diode (Radio shack PN: 276-1102)

Step 2: Install the diode inbetween a line of wire. Or better put, get two pieces or wire and wire on to each side of the diode. You can solder it or wrap the wire around the diode wire and tape it up with electrical tape (NOT RECOMMEND, you should solder it)

Step 3: Remove the Prk fuse 10amp and the drl fuse 10amp.

Step 4: lift the park relay and drl relay and place the wire/diode ends (exposed wire) into the specific slots in the relay. 86/85 respectivily. Make sure the little grey strip, the cathode side, is point towards the PRK RELAY 86. Also make sure the diodes wires arent exposed and not grounding on anything.

Step 5: Replace the relays in their specific slots. Make sure to line them up correctly; they got numbers next to the contact points on the bottom so its really easy no to mess this up.

Step 6: Replace the fuses.

Step 7: Enjoy!!

HummBob -> RE: DRL's + headlights simultaneously..? (3/29/2007 3:27:37 PM)

[image]http://i97.photobucket.com/albums/l223/HummBob/Copyofh215.jpg[/image]

HummBob -> RE: DRL's + headlights simultaneously..? (3/29/2007 3:28:36 PM)

[image]http://i97.photobucket.com/albums/l223/HummBob/h26.jpg[/image]

Calgary -> RE: DRL's + headlights simultaneously..? (4/7/2007 11:26:26 PM)

Wow,

HummBob knows everything!! I just did this modification. It was simple, quick, and well worth it. Thanks again Bob for the detailed information. Very much appreciated.

bobh002 -> RE: DRL's + headlights simultaneously..? (7/3/2007 7:40:26 PM)

Thanks to HummBob and his description, for less than $1.00 i'm running drl's night and day and I like it!! and I put ambers in my drl's. (you have to click on the pic to see the animation)

[image]local://upfiles/2022/F51118693FDC432A8F62FFDD8C7CD789.gif[/image]

HummBob -> RE: DRL's + headlights simultaneously..? (7/7/2007 2:21:39 PM)

quote:

ORIGINAL: bobh002

Thanks to HummBob and his description, for less than $1.00 i'm running drl's night and day and I like it!! and I put ambers in my drl's. (you have to click on the pic to see the animation)

[image]local://upfiles/2022/F51118693FDC432A8F62FFDD8C7CD789.gif[/image]


AWESOME!!!

Those Amber DRL's look Wicked!!!!

MRDM1 -> RE: DRL's + headlights simultaneously..? (7/20/2007 5:45:29 AM)

NICE PICSS

gatordentistry -> RE: DRL's + headlights simultaneously..? (7/20/2007 6:49:57 PM)

HummBob ,  Thanks man, looks great.  I sodered and put black tape to make sure, think this will be ok?  Thanks again.  Love it.    

  

Page: [1] 2   next >   >>

Return to Hummer Forums home page or view the Full Version of this page.