RE: Front-end Rattle...Any Suggestions?
Login  | |
|
RE: Front-end Rattle...Any Suggestions? - 9/22/2007 9:23:33 AM
|
|
|
SteveO
Posts: 312
Joined: 6/2/2007
Status: offline
|
Just dropped my 07 H3 off to have the steering shaft repaired.......I gave him the part #25900714 when I called and he called me back confirming the # matched.
|
|
|
|
|
|
|
RE: Front-end Rattle...Any Suggestions? - 9/24/2007 10:05:44 AM
|
|
|
ciaa12
Posts: 1
Joined: 9/24/2007
Status: offline
|
I'm glad I ran across this forum, I have the same rattle too, had 8 miles on it when I drove off the lot too, along with a shaking mirror glass, misaligned steering wheel and bad vibration, reminds me of cars 30 years ago, where you took 'em back with 15 or 20 things wrong, unacceptable by todays standards. I was told all the mirrors did that, funny thing is, my road test vehicle didn't have a shaking mirror and neither did 8 H3's on the lot. It's been back twice & come home with the same problems still there. No road test nowadays ??? The sales staff was and is outstanding, I'm still reserving judgement on the service dept, but it's not looking good, which is why I usually do my own work. Had I road tested the 1 I bought, they would have lost a sale.
|
|
|
|
|
|
|
RE: Front-end Rattle...Any Suggestions? - 9/24/2007 5:02:41 PM
|
|
|
671H3
Posts: 640
Joined: 7/26/2007
From: Guam U.S.A
Status: offline
|
The new lower steering shaft was replaced on my first H3 and an alignment wasn't necessary. It's been over a month and it's doing fine. I'm still waiting for my new H3 to be worked on.
_____________________________
[IMG]http://i28.photobucket.com/albums/c243/671db8/671H3Guam-1.jpg[/IMG]
2008 Hummer H3 *Boulder Grey* / 2007 Hummer H3 *Birch White*
|
|
|
|
|
RE: Front-end Rattle...Any Suggestions? - 9/27/2007 9:40:05 AM
|
|
|
h3carlos
Posts: 92
Joined: 10/7/2006
Status: offline
|
I took mine in yesterday, but it was not the Shaft. They said the "stabelizer links" were loose and about to fall off. So they removed them to make sure they were fine and put 'em on and re-torqued them. NOISE IS GONE!!
|
|
|
|
|
RE: Front-end Rattle...Any Suggestions? - 10/1/2007 12:45:54 PM
|
|
|
Manford
Posts: 12
Joined: 6/6/2007
Status: offline
|
Been a while since I checked in here... thought I might post a follow up on my service.
DISCLAIMER: I flipped thru the 19 pages of posts pretty quick, so if I missed something, my apologies.
I had the shaft replaced back in early August, to no avail. In fact, the issue is worse than before. Service dealer basically gave me the "one per customer" line until the new part comes out. Don at McGinnis confirmed that the factory part number has changed, and that a newly engineered part isn't available at this time. He did confirm that I'm still on the list, and verified my name. Don is a nice guy to deal with, btw.
So, for now, I continue to drive my klunky H3 either really slow in the mud or above 55mph on the freeway. Anywhere in-between and it feels like it is about to fall apart.
Good luck,
Manford
|
|
|
|
|
RE: Front-end Rattle...Any Suggestions? - 10/2/2007 11:41:35 AM
|
|
|
greenshirt77
Posts: 94
Joined: 5/7/2007
Status: offline
|
Don may be a nice guy, but that doesn't mean he knows what he's talking about 100% of the time. It seems to me that McGinnis has popped up on several occasions in regards to misinformation. Even earlier in this thread I believe, as I remember commenting on them before.
The new redesigned lower steering shaft has been available for the last month and a half or so. Fixes with the new shaft began in mid-late Aug I believe. Mine was performed exactly 4 weeks ago.
|
|
|
|
|
RE: Front-end Rattle...Any Suggestions? - 10/2/2007 8:11:30 PM
|
|
|
H3PR
Posts: 30
Joined: 6/25/2007
Status: offline
|
greenshirt77 is absolutely correct. By now the replacement drive shaft issue is an old story. It's been more than a month since my H3 was serviced for this particular problem, and it's now running just like when I first purchased it. You should have McGinnis folks make contact with the DeMontrond Hummer dealer in Houston. By now, and this late in the game no Hummer dealer should be playing the "I know more than you game." Be nice to them, but tuff and let them know that you need to get your rig fix yesterday.
|
|
|
|
|
RE: Front-end Rattle...Any Suggestions? - 10/3/2007 6:24:22 PM
|
|
|
Manford
Posts: 12
Joined: 6/6/2007
Status: offline
|
quote:
ORIGINAL: greenshirt77
It seems to me that McGinnis has popped up on several occasions in regards to misinformation. Even earlier in this thread I believe, as I remember commenting on them before.
My bad, most of your comments were on page 18. Looks like I flipped thru that page a little to fast.
Calling DeMontrond tomorrow to get their sitrep.
Thanks,
Manford
|
|
|
|
|
|
|
RE: Front-end Rattle...Any Suggestions? - 10/4/2007 10:01:08 AM
|
|
|
Manford
Posts: 12
Joined: 6/6/2007
Status: offline
|
quote:
ORIGINAL: H3PR
Part Number: 25776339. Description: Shaft 6.524.
Glad to hear your issue is solved!
I phoned DeMontrond, got voice mail, will try again later.
I talked Beck and Masten, and they confirmed that a new part is available, but on back order. I'm going to phone Don at McGinnis again and see what he has to say about all this. That dealer is close to my place of work, so if I can get it fixed there, great. If not, I'll gladly use another dealer, I really don't feel any loyalty to any of them at this point.
H3PR, the question I have for you is the part number that you listed above is different from the #25900714 others have listed. Which one is correct?
Thanks,
Manford
|
|
|
|
|
RE: Front-end Rattle...Any Suggestions? - 10/4/2007 2:16:21 PM
|
|
|
greenshirt77
Posts: 94
Joined: 5/7/2007
Status: offline
|
[/quote]
H3PR, the question I have for you is the part number that you listed above is different from the #25900714 others have listed. Which one is correct?
Thanks,
Manford
[/quote]
I'm not 100% sure on this, so don't quote me. Several people mentioned that originally, even though the lower shaft was a redesign, GM was still using the same part # as the old shaft. Possibly this is the # that H3PR posted, and was being used before the new part # was assigned. I'm really not sure though.
What I am sure of, is that the part # on my invoice (from 4 wks ago) is 25900714, and that currently seems to be the # that is being used, as others that have had the fix very recently have this # on their invoices.
|
|
|
|
|
RE: Front-end Rattle...Any Suggestions? - 10/4/2007 5:35:46 PM
|
|
|
671H3
Posts: 640
Joined: 7/26/2007
From: Guam U.S.A
Status: offline
|
In what I've read in the previous posts, the old shaft has a white marking and the new shaft has a yellow marking.
_____________________________
[IMG]http://i28.photobucket.com/albums/c243/671db8/671H3Guam-1.jpg[/IMG]
2008 Hummer H3 *Boulder Grey* / 2007 Hummer H3 *Birch White*
|
|
|
|
Contact Us |
Advertising |
Automotive Directory |
About Us |
Link To Us |
Archive |
Hummer Links |
Legal |
Privacy Policy |
© Hummer Forums.com
Hummer Forums .com is not affiliated with or endorsed by General Motors Corporation.
|
Printable Version
